1) For a week or so the machine has not filled on start, it pulses water valve a couple of times and seems to try and turn agitator and then starts beeping. Sometimes by restarting machine you can get it going and it completes cycle.
2) Have checked water flow, solenoids, lid switch and OOB switch. All appear to be OK.
3) Now when plugging in machine the 5 led's (long wash to short wash inclusive flash, and just keep flashing.
4) Wash Temp down and then power to enter diagnostic brings up 0000 0010.
Thanks for any info email: stevemcg@ihug.co.nz
