I really, really need some advice on this before I part with cash.
I have taken the motor out and tested it with a multi meter.
With the meter set to 200 ohms I get the following results.
Between the red & white wires I get 77.2 ohms
Between the brown & white wire I get 45.2 ohms
Between the red brown wires I get 122.2 ohms
The motor is free and can be turned by hand.
The resistance between the connections on the heater are 30.5 ohms
There is no resistance between the terminal of the capacitor on the motor.
Is the motor shot or is it something else?