Dishwasher Help Forum

[bigred]

hi

diplomat d/washer mod adp 8224

this machine runs for about 10 min on a program but does not heat
just emptys & fills like it just rinses.
it does not show any error codes , stops as if the prog has done.

any idea's thanks

[tintin]

There is a few things that can cause that,but I would check the heating element 1st,might be open circuit.

[bigred]

the element & stat test out ok

[Dave_Conway]

If there's definitely no error code on the LCD display then it points to the PCB itself to be honest

There are other factors though that can cause software errors on these, I would recommend an engineer on this one as the PCB is over £100 and a wrong diagnosis could prove costly, check the repairs@ link below

If you do procede, power off please when checking

Dave.

[bigred]

ran it through another prog got warm on wash but completed too quick

with no dry at the end.

so it does look like PCB is up the creek