I recently had E8 on my Beko so I found this forum, bought the ice cube tray sensor and replaced it (the old one had been almost completely severed). The E8 disappeared. That was easy I thought...
I have been waiting for ice cubes to appear for about 24 hours. There are none.
The ice tray does not fill with water. I checked the back of the freezer and found that a tube had become dislodged from what might be the feed into the ice cube tray. I reconnected this - still no water coming through.
There was a filter warning on the freezer, which I have cancelled by holding one of the button for 5 seconds.
Other interesting information - when I press Ice off, then Ice on again, the ice cube tray rotates about 5 degress toward the back of the machine, then 5 degrees toward the front, then nothing happens. It sounds a bit laboured - is the arm supposed to move as well?
Anyone have any ideas as to why the water won't fill the ice tray?