Australasian Appliance Forum

Does anyone have the partial or complete list of error codes for this machine?

Can someone explain whilst in diagnostic mode by using the spin up button; is this stepping through the fault log from most recent to last numbered 1-15 or does this action step from 1 to 15 the diagnostic levels which each have a corresponding result?


Many thanks to anyone that can assist with this.

The first code is all we need......

We cannot publish the full list of Codes. The info is copyright to F+P; and whilst they seem happy enough for us to answer posters specific problems, I have no wish to run into a Maori hit squad on the way back from the pub........

If you can tell us what code you have pulled and a brief description of what the machine is actually up to, I'll try and help.

Nice to see my old avatar back up again.

Penguin45.

Can anyone tell me what GW708U error code 101011 = 43 means?

DIYHAZARD

Out of balance switch failure. It gets wet and starts sticking, the wiring/connectors also corrode.

Top deck (and power) off to get at it.

Penguin45.

Thanks,

In the meantime I took it apart, tipped it over to look underneath and re-leveled it. It's working again so I must have freed up the switch. I'll order a one.

DIHAZARD