Spare Parts Help

by **mark1892** » Sat Jun 14, 2008 3:13 pm

A relative needs a new latch receiver for a Hoover New Wave tumble dryer D6986. been told the item is now obsolete but they have just paid 40 quid for a new door so would really like to get hold of one.

thanks in advance if anyone can help. i will get the serial and model no now and post them up.

tried that mate thanx but no luck. the door closes fine but the prongs on the back which the switch clamp onto have broken off. having just paid 40 quid for the door, i am tempted to just bypass the switch or tape the plunger on the switch so it will work. i know its probs not a recommended fix but anything is better than scrapping it just for this.

by **Phidom** » Mon Jun 16, 2008 12:33 pm

The latch receiver is just a plastic plate that screws on the outside of the cabinet, are you sure that's the part you mean?

by **mark1892** » Mon Jun 16, 2008 11:29 pm

yes mate it screws on to the cabinet but then the switch that the door pushes on, screws to it on the inside. to make it work when you shut the door.

by **Phidom** » Tue Jun 17, 2008 7:11 am

I've probably got a secondhand one but I can't find any photos of the part so would be unable to identify the correct one.

by **mark1892** » Tue Jun 17, 2008 9:19 am

phidom, thanks for your help mate. whereabouts in the north east are you? i have managed to screw the switch onto the back of the latch receiver and is working ok at the moment but if you had one it would be better if i fitted that. i will take a pic of it next time im over there and post on here to see if you have a match.

regards
mark

by **Phidom** » Tue Jun 17, 2008 8:06 pm

OK, I'm near Buckie.

by **sheer1delight** » Thu Jun 19, 2008 7:47 am

Is this the same item as fits softwave machine. Microswitch fits on two posts of assembly which in turn bolts to front part of latch that is located on front of machine?

I could forward secondhand assembly.

Even better. Why not visit your local council/ scrapyard and buy a whole machine for a few quid? There is a chance you will find one there!

Regards

by **sheer1delight** » Thu Jun 19, 2008 8:02 am

Ooops sorry. I thought this was a washer dryer.you were describing- my fault. Do you know if tumble dryer interlock is similar to that of washer or washer/dryer.

regards

by **mark1892** » Thu Jun 26, 2008 12:04 am

sheer1delight wrote:Is this the same item as fits softwave machine. Microswitch fits on two posts of assembly which in turn bolts to front part of latch that is located on front of machine?

I could forward secondhand assembly.

Even better. Why not visit your local council/ scrapyard and buy a whole machine for a few quid? There is a chance you will find one there!

Regards

already tried the recycle place. none that type. your description sounds right and it is off a softwave dryer, have you a pic??

Cookers & Ovens	Washing Machine	Tumble Dryer	Fridges & Freezers
Dishwasher Spares	Cooker Hoods	Vacuum Cleaners	Fridge Water Filters

Spare Parts Help

Hoover Tumble Dryer latch receiver

Spare parts for appliances from UK Whitegoods

Click here to ask us to find a spare part for you

Hoover Tumble Dryer latch receiver

Advertisement

Re: Hoover latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Re: Hoover Tumble Dryer latch receiver

Who is online

Login

Main Menu

User Menu

Who is online