|Cookers & Ovens||Washing Machine||Tumble Dryer||Fridges & Freezers|
|Dishwasher Spares||Cooker Hoods||Vacuum Cleaners||Fridge Water Filters|
iadom wrote:Its on the back, dead centre. If you take if off and a lot of black dust falls out then its almost certain your drum shaft has worn right through.
helo_75 wrote:if that diagram is from the front of the machine, then the belts on wrong!
both sides of the belt should be to the right of the pulley, the left side running on it!!
and yes its unbelievably tight to get on
helo_75 wrote:thats exactly how it should be
good luck putting it on, i use an old belt to drag the belt over the pulley, it really seems too tight, but trust me when i say its right
thats the reason the pulleys and drum bearings fail so quickly.. far too much tension
Users browsing this forum: Dazmufc, Google [Bot] and 78 guests