Fridge And Freezer Forum

I've got fault code no. 10 showing on the FREEZER side of the RS21 Samsung Fridge Freezer ( not the more notorious fridge side problems !!)

Can anyone advise me what part(s) I need to check and /or replace to get fault code 10 to clear ?

Full model number and serial nber please

The model is RS21DCNS, seriel no. 854042BLCo1926B.

I took some measurements.

Freezer drain heater measures 1.2Ohms, I read the fridge side one should read 2.11 OHms, anyone any idea what a new or fully functional FREEZER side drain heater resistance should read ?

I checked the thermal fuse, that is ok.

The main evaporator assembly heater in the FREEZER side measures 230 OHMs, again I know the fridge side evaporator heater should measure about 485 OHms to pass the test, does anyone know what resistance the FREEZER side evaporator heater should read ?

I checked the defrost sensor, that is responding ok, i.e. it's resistance changes when I warm it to 20C and resistance increases when I cool it to about 0C in an ice/water mix.

Fan is ok.

ANY advice on what reading's I should get on these two FREEZER side heaters would be very helpful. Thanks Adam

Hi

Change the defrost sensor.

Bryan