Moderators: r600a, johnmac11, eastlmark, Jackal, Del, Dave_Conway, don, iadom, Penguin45, Dales-Electronic, dquinn
Spare parts for appliances from UK Whitegoods
I have a Zanussi Jet System 1200 Rinse Sensor FJ 1295 serial number 44600856.
I have owned this machine for about 10 years. It has developed a fault so that when I close the door the machine will not start approx 9 out of 10 times.
On the occasions when I can get it to work, sometimes it goes through the cycle with no problems at all and will start the next few times. Other times it won't start at all.
On some occasions when it starts it does not perform the cycle and races through the programme with no spins.
The machine has recently had new drum bearings fitted so I am a bit reluctant to give up on it yet.
Any help would be appreciated,
Door lock, situated to the right of the door seal, accessible from the front. Ensure it is unplugged before you investigate.
Any doubts or fears, call in the experts.
If it wasn't for pick-pockets & frisking at airports, I'd have no sex life at all .................Rodney Dangerfield.
- Appliance Forum Veteran
- Posts: 2356
- Joined: Tue Jun 17, 2003 12:00 am
- Location: Bridgwater Somerset
Thank you for your response but looking at the machine the lock mechanism does not seem accesible from the front. Are you saying it needs a relpacement or can it be adjusted?
http://www.ukwhitegoods.co.uk/modules.p ... ducts_id=2
Is what you want - access is through the door seal. The lock cannot be adjusted, only replaced.
Which bit of "Unplug it" is causing the problem?
Stop eMailing me. This is a perfectly good forum - use it!
- Appliance Forum Moderator
- Posts: 20159
- Joined: Tue Jan 13, 2004 12:00 am
- Location: Soviet Republic of Yorkshire
Thank you both for the prompt replies. Your help is very much appreiciated.
Part arrived today, fitted, machine works fine.
Thank you for your help, much apprieciated.
Return to Washing Machine Help Forum
- Zanussi Jetstream FJ1295
by philippa33 » Fri Mar 24, 2006 11:17 am
- 1 Replies
- 614 Views
- Last post by Simon46
Fri Mar 24, 2006 11:24 am
- Zanussi FJ1295 "stopping"
by Dave_Neff » Tue Dec 18, 2007 12:52 pm
- 6 Replies
- 1533 Views
- Last post by Dave_Neff
Fri Dec 21, 2007 8:12 am
- Zanussi fj1295 drum not spinning?
by Draco » Thu May 19, 2005 10:43 am
- 3 Replies
- 1277 Views
- Last post by Dave_Conway
Thu May 19, 2005 3:53 pm
- zanussi fj1295 door seal
by Turboman » Fri May 19, 2006 12:31 pm
- 1 Replies
- 484 Views
- Last post by Martin
Fri May 19, 2006 2:04 pm
- Zanussi FJ1295 (Jet System 1200)
by marmot » Tue Sep 19, 2006 10:52 am
- 2 Replies
- 755 Views
- Last post by marmot
Tue Sep 19, 2006 7:24 pm
Who is online
Users browsing this forum: No registered users and 22 guests