Washing Machine Help Forum

I have a hnl 6166 nextra

a week ago it had a stuck sock in the pump, remvoed it and it was fine,

Now this weekend, it has started to play up again.
It starts the cycle water enters,
And takes in the washing power then
after that it just sits idle
You can hear a click but it does not the turn the drum.

I removed the motor and check the brushes they had more than 1/2 inch left on them.
on the connector block one of the red wires, (live ?) had come off, i soldered this back on, and checked it had continuity to the motor and all else was fine,.

What other things can i investigate ..
And could this be an issue with the triac ?

thanks

just tries it again,
When it has filled the drum,
There is a click sound coming from the ecu/control module.
It doesn't progress any further after this.

Am I correct in thinking the problem is most likley an issue with the pcb ... triac etc/..

That is for certain sure.

Any one know where I can get values for the triacs
I need a value for the little ones, on this board like the tr7

Thanks