Dishwasher Help Forum

hi

diplomat d/washer mod adp 8224

this machine runs for about 10 min on a program but does not heat
just emptys & fills like it just rinses.
it does not show any error codes , stops as if the prog has done.

any idea's thanks

There is a few things that can cause that,but I would check the heating element 1st,might be open circuit.

the element & stat test out ok

If there's definitely no error code on the LCD display then it points to the PCB itself to be honest

There are other factors though that can cause software errors on these, I would recommend an engineer on this one as the PCB is over £100 and a wrong diagnosis could prove costly, check the repairs@ link below

If you do procede, power off please when checking

Dave.

ran it through another prog got warm on wash but completed too quick

with no dry at the end.

so it does look like PCB is up the creek