UK Whitegoods Domestic Appliance Help & Support Forums

Dishwasher Help Forum

Beko DIN26X20 Display

Forum to get help and advice on any dishwasher problems that you may have for full size, slimline dishwashers. For dishwasher spares click here

Get spare parts for dishwashers

Buy dishwasher spare parts in our store for all major dishwasher makes and models including many low cost compatible spares or contact us and we will find the parts you need for you

 UK Whitegoods Spare Parts Store

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and access to over 14 million spare parts who will help you find any part you need and get it to you as fast and cheap as possible

 Use this link to email us, tell us what you need and we'll find parts for you

shop spare parts

by blueandy » Wed Sep 13, 2017 11:30 am

Hi there,

My dishwasher, though still functioning, seems to have a display panel problem. The display flashes a series of incomprehensible symbols which eventually stay fixed on a set of (again) incomprehensible symbols. The machine still goes through a cycle when I load and start as normal. However, it seems to go through a very long cycle (about 3 hours), then makes an unusual noise (buzzing, but not loudly), before ending with a series of beeps as normal. The load is thoroughly cleaned, but I'm concerned about the cycle length and lack of controllability - particularly since I usually only use the eco setting (45 mins length). I have tried switching off and removing the plug from the socket for several periods.

Any ideas or guidance on possible repair gratefully received.
User avatar
Whitegoods Newbie
Whitegoods Newbie
Posts: 1
Joined: Wed Sep 13, 2017 11:19 am

 Do you need an dishwasher repair?

Find local approved dishwasher repair companies using our free search of hundreds of repairers to find approved companies in your area that will repair almost any dishwasher including built in and integrated dishwashers


by kwatt » Wed Sep 13, 2017 12:53 pm

I had a quick look and about all I can think that might cause that is the board, possibly due to spillage on it especially so as you say it seems to be working okay.

It's a bit of a punt of course but the board is this one: ... ntrol-card

It's nil stock UK and EU though with no fixed ETA presently.

"Sometimes you get the best light from a burning bridge" Don Henley

Cheap appliance spare parts in our store Find an appliance repair company here
User avatar
Appliance Forum Administrator
Appliance Forum Administrator
Posts: 26101
Joined: Sun Jun 15, 2003 12:00 am
Location: Scotland

 Dishwasher spray arm broken?

If your dishwasher isn't washing as well as it should then your spray arms may be blocked or faulty resulting in the dishwasher not cleaning as it should. You can buy replacement spray arms and associated spare parts from our store to fit all major makes including AEG, Beko, Hotpoint, Smeg and many more

Do check carefully when ordering spray arms as while many may look the same they might well not be, if you are unsure please email to ask for assistance and we'll find it for you

spray arms for most dishwashers including popular makes like Hoover, Zanussi, Smeg, Diplomat, Bosch and many more

Return to Dishwasher Help Forum