UK Whitegoods Domestic Appliance Help & Support Forums

Dishwasher Help Forum

Hotpoint LTB 4M116 integrated Dishwasher stuck mid-programme

Forum to get help and advice on any dishwasher problems that you may have for full size, slimline dishwashers. For dishwasher spares click here

Get spare parts for dishwashers

Buy dishwasher spare parts in our store for all major dishwasher makes and models including many low cost compatible spares or contact us and we will find the parts you need for you

 UK Whitegoods Spare Parts Store

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and access to over 14 million spare parts who will help you find any part you need and get it to you as fast and cheap as possible

 Use this link to email us, tell us what you need and we'll find parts for you

shop spare parts

by GDS » Tue Feb 13, 2018 2:16 pm

Hi, I have had this dishwasher for perhaps a couple of years. It has been trouble free until yesterday. The program appears not to have finished: the on/off light is flashing rapidly and the ECO program light is on (not flashing). When I push the on/off button the lights go off but only for about 3 seconds. A noise then appears from the sump area . The sump is empty. I have taken out the filter and cleaned it although it wasn't particularly dirty. There is a very small jet of water bubbling out from the 9 o'clock position of the bottom of the sump; this appears to be making the noise.

I am stumped because all the error codes that I can find on the internet don't show the control panel of this model. I have tried holding the on/off switch down for a long period, but the noise and the jet of water start up again. I can't even switch it off because it starts up again on its own. I have also switched it off at the plug but when I switched back on, the problem resumed. I have a ten year parts cover from Hotpoint so only have to pay labour but fear that this could be high. Any help/advice would be welcome. Thanks.
User avatar
Whitegoods Newbie
Whitegoods Newbie
Posts: 1
Joined: Tue Feb 13, 2018 1:42 pm

 Dishwasher spray arm broken?

If your dishwasher isn't washing as well as it should then your spray arms may be blocked or faulty resulting in the dishwasher not cleaning as it should. You can buy replacement spray arms and associated spare parts from our store to fit all major makes including AEG, Beko, Hotpoint, Smeg and many more

Do check carefully when ordering spray arms as while many may look the same they might well not be, if you are unsure please email to ask for assistance and we'll find it for you

spray arms for most dishwashers including popular makes like Hoover, Zanussi, Smeg, Diplomat, Bosch and many more

Return to Dishwasher Help Forum