UK Whitegoods Domestic Appliance Help & Support Forums

Washing Machine Help Forum

Logik L612WM13

This forum is for support, help and questions you have about washing machines and washer dryers. For washing machine spares click here

Get spare parts for washing machines

Buy washing machine spare parts in our store for all major washing machine makes and models including many low cost compatible spares or contact us and we will find the parts you need for you

 Support The Repair Community

How you can help in supporting out community is simple, just just use repairers from our online repair search if you need an appliance repaired

Buy any parts you need in our store that helps fund and maintain this website and the free use of it.

Don't use an adblocker.

That's all you need to do and we all appreciate your support and assistance.


by Anthony Morrison » Thu Oct 12, 2017 4:59 pm

Hello. My login washing machine is showing error code E21, overtime 3 minutes of the drainage. The machine is draining and pump spins freely yet still shows the error code?
User avatar
Anthony Morrison
Whitegoods Newbie
Whitegoods Newbie
 
Posts: 2
Joined: Thu Oct 12, 2017 4:52 pm

 Before you post it… search it!

Please, before you post and ask something that has been asked before (often many times) please use the search facilities available.

Here you can search the forums only, including trade forums with permissions

Here you can search the entire site including all articles, public forums and online store

Use the search function before you post!

by Anthony Morrison » Thu Oct 12, 2017 5:00 pm

Sorry. It is a logik machine
User avatar
Anthony Morrison
Whitegoods Newbie
Whitegoods Newbie
 
Posts: 2
Joined: Thu Oct 12, 2017 4:52 pm

by 1totalshambles » Sun Oct 15, 2017 8:26 am

E21 = pump out problem. If still shows this fault but does actually pump out water it is possible that pressure switch is at fault, it is quite common that they can fail either to cause over filling or the opposite = no filling at all or stuck on pump out because it thinks it has overfilled or blockage in air trap-follow the black hose from the pressure switch down to the air trap. There`s a rough / bad translation from Chinese on Partmaster just find your model and then find service manual. Tap side of pressure switch a few times with a screw driver handle, if that does cure it still change the pressure switch.
User avatar
1totalshambles
Valued Contributor
Valued Contributor
 
Posts: 239
Joined: Mon May 25, 2015 12:39 pm



 UK Whitegoods Spare Parts Store

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and access to over 14 million spare parts who will help you find any part you need and get it to you as fast and cheap as possible

 Use this link to email us, tell us what you need and we'll find parts for you

shop spare parts
    
    
    
    
     
    
    

Return to Washing Machine Help Forum