UK Whitegoods Domestic Appliance Help & Support Forums

Cooker And Oven Forum

Electrolux when turned on fan does not always start.

This forum is for any cooking appliances that you need help with like cookers, ovens, hobs, hoods & microwaves. For cooker and oven spares click here

Get oven and cooker spare parts

Buy spare parts in our store for built in ones and cookers including range cookers with many low cost compatible spares available or contact us and we will find the parts you need for you

 UK Whitegoods Spare Parts Store

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and access to over 14 million spare parts who will help you find any part you need and get it to you as fast and cheap as possible

 Use this link to email us, tell us what you need and we'll find parts for you

shop spare parts
    
    
    
    
     
    
    

by philp1863 » Sat Aug 12, 2017 3:26 pm

We have an Electrolux EOC6630. Its a few years old now, but still generally works well and is in good condition. Over recent months a fault has started to occur where we would (from cold) select the fan mode and the red light would come on(as expected), but the fan does not always start. It does this intermittently...sometimes it works and other times it does not work(dont know why). I am pretty sure (but need to confirm this) that the audible click does not occur when the fan does not actually come on. I read that there was a Fan Start stat switch and was wondering if this switch could be sticking or something? Any help or comments would be much appreciated. Thanks
User avatar
philp1863
Appliance Forum User
Appliance Forum User
 
Posts: 6
Joined: Sat Aug 12, 2017 3:06 pm

 Grill element not heating up?

If the grill in your oven or cooker doesn’t heat up any more then there is a good chance that the heating element has failed. Find a new heating element in our store including many low cost compatible heating elements for all major brands including Belling, Bosch, Beko, Lamona, Diplomat, Smeg and many more

Buy Fan oven elements and other heating elements for built in ovens and cookers online

by philp1863 » Sat Aug 12, 2017 3:34 pm

Thanks for that, The oven does heat up and we have tried turning the fan to see if it was seized or something, but to no avail. thanks
User avatar
philp1863
Appliance Forum User
Appliance Forum User
 
Posts: 6
Joined: Sat Aug 12, 2017 3:06 pm

by electrofix » Sat Aug 12, 2017 3:41 pm

when you try to turn the fan does it feel like its trying?

if you take the cover off can you spin the fan easily ?

Dave
User avatar
electrofix
Appliance Forum Moderator
Appliance Forum Moderator
 
Posts: 4852
Joined: Thu Jun 02, 2005 12:00 am
Location: merseyside

by philp1863 » Sat Aug 12, 2017 5:34 pm

Thanks Dave. The fan does not sound like it is trying. It does spin freely. As I mentioned earlier, when the fan works, you can hear a click when you turn the switch to Fan. If the fan does not start then you dont here this click....thats what makes me think that it might be some sort of relay or start switch. However when it decides not to work its stubborn in that you can keep trying to turn to fan and it will just not work!!!. If you leave it for a while then suddenly it will work again??? I just dont understand it. Thanks again
User avatar
philp1863
Appliance Forum User
Appliance Forum User
 
Posts: 6
Joined: Sat Aug 12, 2017 3:06 pm

by electrofix » Sat Aug 12, 2017 5:53 pm

there are 6 different models with the same model numbers but the one I looked up uses the circuit board to control the fan. cant see why there would be a click as the fan is controlled by a triac which is noiseless

if you let me have the pnc number I or someone else can double check your model
Dave
User avatar
electrofix
Appliance Forum Moderator
Appliance Forum Moderator
 
Posts: 4852
Joined: Thu Jun 02, 2005 12:00 am
Location: merseyside

by philp1863 » Sat Aug 12, 2017 6:47 pm

Thanks Dave. Sorry maybe the click is a red herring....At the moment the fan is happily working, so I cant check this. I just thought that was the case. Obviously now it clicks everytime I turn the left dial to Fan(of course because its working). Every so often it will decide it wont work, which can of course be very inconveniant just before dinner. The PNC is PNC 944 182 611. Thank you for all your help.
User avatar
philp1863
Appliance Forum User
Appliance Forum User
 
Posts: 6
Joined: Sat Aug 12, 2017 3:06 pm

by Martin » Sat Aug 12, 2017 7:01 pm

A squirt of oil on the fan motor bearings, end of problem 9 times out of 10 :wink:
User avatar
Martin
Appliance Master
Appliance Master
 
Posts: 26013
Joined: Thu Jun 19, 2003 12:00 am
Location: Over the hill

by philp1863 » Sat Aug 12, 2017 7:07 pm

Thanks Martin. The Fan turns easily and if you try and help it along in the case of failure it does not help. I think when it fails it is an electrical problem like a fan start stat switch??? I will listen out again next time it fails and see if it does make the click sound just to clarify that. But until it fails i cant do anything more. If it is the motherboard then really thats the end as it probably wont be worth fixing? Thanks again.
User avatar
philp1863
Appliance Forum User
Appliance Forum User
 
Posts: 6
Joined: Sat Aug 12, 2017 3:06 pm

by philp1863 » Sun Aug 13, 2017 10:24 am

Hi guys. I really must apologize for getting the facts wrong in my earlier posts. Sorry!! This morning the oven did its trick of the fan not coming on.
1. The click does still happen, so its got nothing to do with that.
2. I thought that the element heat still worked......It does not. I turned the right hand side dial to ask for heat and nothing happened. So fan did not work and no heat. I turned the heat right up and still did not work. We left it like this and still nothing happened. My wife 10-15 mins later (coincidently?)turned down the heat dial and shortly after that the fan started working.
Note:- Normally the fan will start working as soon as I select fan on the left control(with no heat selected).
Note:- I did replace the fan heating element a couple of years ago.
Does this make better sense????
Again sorry for the mis-information. Thanks
User avatar
philp1863
Appliance Forum User
Appliance Forum User
 
Posts: 6
Joined: Sat Aug 12, 2017 3:06 pm



 Support The Repair Community

How you can help in supporting out community is simple, just just use repairers from our online repair search if you need an appliance repaired

Buy any parts you need in our store that helps fund and maintain this website and the free use of it.

Don't use an adblocker.

That's all you need to do and we all appreciate your support and assistance.


Return to Cooker And Oven Forum

 Oven & cooker switches

We supply switches and most other oven and cooker spare parts to the trade and public in our online spare parts store at terrific prices for all major brands including Smeg, Beko, Leisure, Stoves, Rangemaster, Britannia and many, many more

“Shop