UK Whitegoods Domestic Appliance Help & Support Forums

Cooker And Oven Forum

Oven igniter won’t stop clicking - cannon 10750G

This forum is for any cooking appliances that you need help with like cookers, ovens, hobs, hoods & microwaves. For cooker and oven spares click here

Get oven and cooker spare parts

Buy spare parts in our store for built in ones and cookers including range cookers with many low cost compatible spares available or contact us and we will find the parts you need for you

 Oven & cooker fan motors

Should you need a new fan motor for your built in oven, cooker or range cooker that are a common cause of noise or uneven cooking then we can supply almost any for UK ovens and cookers often at low prices and with many compatible fan motors stocked. Find replacement fan motors in our store for all major brands including Britannia, Bosch, Beko, Lamona, Rangemaster, Smeg and many more

Buy oven fan motors for built in ovens and cookers online

by Yog » Thu Jul 12, 2018 6:57 am

The RH oven on our Cannon 10750G works ok but the igniter won’t shut off. It lights the burner but then just carries on sparking. It’s been working fine til now. Oven temp seems ok but the clicking is driving us nuts!
Update: I disconnected the spade from the electrode and when I turned the gas on it still carried on clicking even though there was no sparking off the detached end. Does that mean it’s sparking somewhere else on the circuit?
Last edited by Yog on Thu Jul 12, 2018 8:25 am, edited 1 time in total.
User avatar
Yog
Appliance Forum User
Appliance Forum User
 
Posts: 19
Joined: Fri Jul 04, 2008 12:00 am
Location: Sheffield, Yorkshire

 Oven & cooker door hinges

If the door on your built in oven or cooker isn’t closing properly it’s almost certain that the door hinges will need to be replaced. Find replacement door hinges in our store for all major brands including Hotpoint, Britannia, Beko, Rosieres, Stoves, Smeg and many more

Buy oven door hinges for built in ovens and cookers online

by electrofix » Thu Jul 12, 2018 7:45 am

the igniter should detect the flame and shut off which means its faulty

Dave
User avatar
electrofix
Appliance Forum Moderator
Appliance Forum Moderator
 
Posts: 6394
Joined: Thu Jun 02, 2005 12:00 am
Location: merseyside

by Yog » Thu Jul 12, 2018 8:27 am

Where’s the fault though? In the electrode? The igniter lead or the actual spark generator which supplies all the igniters and sits under the hob?
User avatar
Yog
Appliance Forum User
Appliance Forum User
 
Posts: 19
Joined: Fri Jul 04, 2008 12:00 am
Location: Sheffield, Yorkshire

by electrofix » Thu Jul 12, 2018 8:31 am

very likely the spark generator

if it was the electrode it would not ignite nor would it if the lead was faulty

Dave
User avatar
electrofix
Appliance Forum Moderator
Appliance Forum Moderator
 
Posts: 6394
Joined: Thu Jun 02, 2005 12:00 am
Location: merseyside

by Yog » Thu Jul 12, 2018 9:36 am

I’ve seen the spark generator. Plastic box with a bunch of spade connectors, under the hob? Anyone know where’s a good place to get a replacement and are they model-specific?
User avatar
Yog
Appliance Forum User
Appliance Forum User
 
Posts: 19
Joined: Fri Jul 04, 2008 12:00 am
Location: Sheffield, Yorkshire

by kaibart » Thu Jul 12, 2018 9:58 am

This is something that needs to be done by a gas safe engineer
User avatar
kaibart
Valued Contributor
Valued Contributor
 
Posts: 623
Joined: Mon Aug 01, 2016 7:48 pm

by electrofix » Thu Jul 12, 2018 11:33 am

you have to get the correct part for your appliance otherwise it may not function properly

looks like this one
https://www.cannon-spares.com/extended_ ... 0c8S7jTXcs

Dave
User avatar
electrofix
Appliance Forum Moderator
Appliance Forum Moderator
 
Posts: 6394
Joined: Thu Jun 02, 2005 12:00 am
Location: merseyside

by Yog » Thu Jul 12, 2018 8:15 pm

kaibart wrote:This is something that needs to be done by a gas safe engineer

Really? I’ve had the hob top off before. No need to touch the gas, not on this cooker anyway. Just a few screws and it lifts off. And there is the spark generator, which is only spade connectors. The gas supply isn’t involved.
User avatar
Yog
Appliance Forum User
Appliance Forum User
 
Posts: 19
Joined: Fri Jul 04, 2008 12:00 am
Location: Sheffield, Yorkshire

by don » Fri Jul 13, 2018 7:33 am

Hi

Kaibart is quite correct in his recommendation of a Gas Safe engineer to carry out this repair on a gas or dual fuel appliance.

There is a link at the top of this forum which explains the reasons why. Click this link for the page.

Don
Please keep your questions to the forums, emails and private messages will not be answered.
User avatar
don
Appliance Forum Moderator
Appliance Forum Moderator
 
Posts: 7073
Joined: Fri Sep 05, 2003 12:00 am
Location: Exeter.



 UK Whitegoods Spare Parts Store

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and access to over 14 million spare parts who will help you find any part you need and get it to you as fast and cheap as possible

 Use this link to email us, tell us what you need and we'll find parts for you

shop spare parts
    
    
    
    
     
    
    

Return to Cooker And Oven Forum

 Oven & cooker switches

We supply switches and most other oven and cooker spare parts to the trade and public in our online spare parts store at terrific prices for all major brands including Smeg, Beko, Leisure, Stoves, Rangemaster, Britannia and many, many more

Shop online for
                        cooker and oven spare parts
http://www.ukwhitegoods.co.uk/