Washing Machine Help Forum

[Debs2460]

Hi, when using my washer dryer to dry there was a burning smell, the machine was noisy, then error E20 came up. We took the back off and saw water coming from the breather pipe. We cleaned out the drainage pipes and found loads of silty gunk in the water filter/pump area. Put it back together thinking we'd done a good job, when we put wash prog on water spewed out of 2 holes melted in the tank! Is it worth repairing, are tanks expensive? The machine is 7 yrs old, but really can't afford a new one, it's been a good machine.
Any advise would be greatly appreciated. Thanks
Debbie

[Penguin45]

pNc number, please. Front or back half of the tub?

Penguin45.

[Debs2460]

It's the back half of the tub, underneath, on the left hand side as you look at it from the back (around 7 o'clock ish).

Sorry I don't understand what pNc number is?? It's a Zanussi WJS 1265W, where do I find pNc?
Thank you.
Debbie

[helo_75]

inside the door, on a sticker nr the door seal

[Debs2460]

Thanks

Right, hopefully one of the numbers below will be it!!

Type : P6247670

Prod no : 914602005/00

Ser no : 14101528

Hope these numbers make sense to someone.

Debbie

[Penguin45]

Hope these numbers make sense to someone.

Yup

1242812-81/4 - tub rear half.
1240159-03/6 - tub half seal.

An email to spares@ukwhitegoods.co.uk will get you a price.

The real problem with this is the amount of work involved. The casing has to be split and the tub removed. As a pro, I'd want an hour and a half to do the job - I'd suggest you allow Sunday...... It's all hand tools and patience.

Penguin45.

[Debs2460]

Thank you very much. I'll see how much it is before I decide.

Cheers

Debbie