Integrated Refrigeration Installation

It is absolutely staggering how many integrated fridge, integrated freezers and integrated fridge freezers that we come across that are not installed correctly. It seems to us at times that installers either don't bother to read the installation instructions or, just choose to ignore them.

So long as they're in, they cool things or freeze things and look good, it's all okay. Well, it often isn't all okay if the refrigeration units are not installed correctly in line with the manufacturer's instructions and it could cost you a lot more in the longer term if the installation is wrong.

Cool air is drawn in from teh room to an integrated fridge or freezer

If this seems like a bit of finger wagging, it partly is. We see so many stupid, stupid things being done to appliances and then people (including retailer and kitchen installers) still expecting them to work correctly.

Integrated Refrigeration Airflow

Probably the single biggest thing that kills integrated or built in refrigeration is the lack of proper airflow and, it can be a slow process that can take months or even years to become a problem. Often by the time the problem is discovered, it's too late, the fridge or freezer is already beyond repair.

You need to consider this very carefully when planning and installing a new kitchen especially or replacing old appliances with new ones.

Airflow for refrigeration products is absolutely critical to the efficiency and longevity of the units.

Any fridge, freezer of fridge freezer is essentially a heat exchange unit, it draws cool air from the surrounding environment and by way f a heat exchange process makes the air inside the cavity of the fridge or freezer cold. If it cannot draw cool air in, it won't work.

Therefore, airflow and a good supply of cool air from the room is imperative and, after this process takes place the air that is heated must be expelled somehow.

Ordinarily the cool air will be drawn in at the bottom of the unit through a grill at the front and the warm air expelled through holes at either side of each adjacent unit towards the very back of the cavity where the fridge or freezer is fitted. This is on integrated under counter fridges and freezers.

An integrated fridge freezer needs a chimney to the back and a minimum airflow at the frontFor built in fridges, freezers and fridge freezers especially that are mounted in a column the warm air rises through a "chimney" at the back of the kitchen cabinet and is safely expelled.

If the vents are blocked or, as is often the case, not even cut out, then heat will build up inside the unit leading to longer running time (costing you much more money in electricity use) as well as slowly overheating and cooking the compressor and possibly adversely affecting the insulation. In other words, it is not good news on any level.

Our advice is very simple, read the installation manual carefully and follow the instructions as if the unit is improperly installed any failure will not be covered by your warranty. And, it may well lead to the early death of your appliance, even some years down the road.

Placement Of Integrated Refrigeration

Whatever you do, don't ever place a fridge, freezer or fridge freezer next to another appliance if you can possibly avoid it, with the exception of course of under counter fridges and freezers designed to be installed this way. Again, consult the instruction manual or contact the manufacturer for specific recommendations.

Putting an integrated or built in fridge or freezer next to an oven is, to be blunt, just plain stupid.

We see it, people and even kitchen designers do it. And, for good measure we'll say it again, this is just completely stupid.

Think about it, it's common sense, you're putting an appliance designed to get very hot right next to one designed to keep things cold, what do you think the results will be?

In case you can't guess, the air around the fridge of freezer will heat up, especially so in an enclosed kitchen cabinet space forcing the refrigeration unit to run longer and work harder which will place the unit under duress and cost you a fortune in electricity as the unit works longer than it should have to.

From an oven or cooker heat "bleeds" warping door seals and so on as they're made from a plastic, letting air into the unit causing ice build up and making the unit run even harder. This problem gets even worse when it's an oven or cooker where grilling is carried out with the door open.

The same applies to plinth heaters, we've seen them mounted under integrated fridges and freezers, just complete stupidity.

It really is common sense. 

Don't place any refrigeration unit next to or close to a heat source, you'll kill it.

Integrated Fridge And Freezer Doors

This hasn't been so much of an issue in recent years, apart from with the cheap Chinese integrated fridges and freezers that have hinges that appear to be made from tin foil.

Ingol door hinge used on many integrated fridge and freezer modelsWhat happens is that nobody thinks to check if the hinges on the fridge, freezer or fridge freezer are suitable for the weight of the kitchen door that is being fitted to it.

Often leading to a "DOH!" moment as the door falls off.

Yes, there are limitations on what can and cannot be fitted and no, not every fridge or freezer is designed to carry the weight of a heavy fridge door and all the bottles and cans stuffed into the fridge door. All this weight strains the door hinges and, eventually, they will stress and break.

Again, apply common sense.

Check the hinges on the integrated appliance that you are buying are suitable for the door that you are fitting before you buy is our advice as, after you fit it, it's too late.

When you are buying a new integrated fridge, freezer or fridge freezer look for the door being fitted with decent hinges such as the Ingol hinges from Coni such as the one shown in the image with replacements hinges available in our store. There are loads of Chinese copies out there now but they really aren't very good quality and this is one way that costs are cut on cheaper units.

Integrated Refrigeration Installed Correctly

Installed correctly and with the above taken into account an integrated fridge, freezer or fridge freezer is no more or less reliable than a normal freestanding unit but, it has to be installed correctly and this is the very first thing that you should ensure is correct.

If you or your installer does something that we consider to be stupid, chances are the fault will not be covered by your warranty, so that's not good.

You may well also experience extended running times, not good for your electricity bill.

In other words, it's not worth the hassle and potential expense of not installing these appliances correctly in the first place.


+7 #8 Iain Girling 2015-08-07 08:24
integrated fridge-freezer. Fridge has packed up and looking to replace the whole unit. Is it an easy DIY job as supplier wants £100 to install.
+2 #7 Charlene 2015-05-13 19:19
Can a integrated top fridge be replaced with an undercounted integrated fridge as we have an integrated fridge and an integrated freezer separate but the fridge sits on top of the freezer! Thanks
+1 #6 Kenneth Watt 2015-02-12 08:06
No Ken, at best highly inadvisable for a variety of reasons. I'd strongly suggest an alternative to this.
0 #5 Ken Ward 2015-02-11 20:07
Can an induction hob be installed in a worktop, such that Half (300mm of width) is over an integrated fridge and the other half (300mm over a draw unit.
I have questioned the kitchen designer regarding ventilation and warranty.
He says the integrated fridge is on adjustable feet and so can be lowered to allow hob to project over fridge.

The hob would be either Electrolux or Neff. I have connected both by email. - Neff say NO. and send part of manual with this written in. - Electrolux have not replied despite follow up reminders.
Moving/replacing the existing fridge will add extra cost to the kitchen makeover.
+2 #4 pauline robinson 2015-01-07 13:32
Hi i have just bought a new house and have an integrated fridge freezer. There is a terrible smell of dampness coming from the fridge but not the freezer. I have tried cleaning the hole at the back of the fridge and cleaned the fridge but the odour is still there, can you help me please
-1 #3 Sheila Martin 2014-09-30 11:33
Watch out for free standing freezers being advertised as under counter. These freezers and fridges are not under counter because they all need at least 4 inches above the product to circulate the air flow. I have just returned 2 freezers because of this problem. Unfortunately, sales people do not seem to know this or chose to ignore it.
-2 #2 sophia 2014-08-08 08:21

I am considering purchasing an integrated tall freezer to be placed in the garage. What I would like to know is whether this has to be housed in a cabinet? Could this be utilised as an over counter model?

+2 #1 Margie Edwards 2014-07-14 10:39
I will have an INDESIT iNTEGRATED FRIDGE-FREEZER DELIVERED 26/7/14.I have been told that installation is simple, as it comes with instructions that are simple to understand.I doubt that that is true. Can you please help me.

Add comment

Please do not use the comments box if you need the following.
With notes on where to get the best help at the end of each line:
Spares Help - From the store "Contact Us" option or
Technical Help & Support - Please use the forums
How To Repair Problems - Please use the forums

Security code



Appliance spares for washing machines, washer dryers, cookers, ovens, hoods, dishwashers and all other major appliances

Get spare parts in our store

email us on for spare parts

Or call on 0845 172 8002

Pay for spare parts using all major credit and debit cards and also instant ant payments using PayPal and Amazon for parts

Find Local Service Engineers

Find a domestic appliance service engineer to repair your washing machine, dishwasher, cooker, oven, fridge or any other major domestic appliance
Find a local approved service engineer to repair your

Forum Support

Appliance help and support forums where you can talk to actual domestic appliance engineers about washing machines, cookers, dishwashers, fridge freezers and more
Use our forums and speak to experts for support and advice
Click here to create an account

Can't Find It? Need More Help With Your Choice? 

Choosing a new is a minefield full of rebranded products, meaningless technobabble and marketing messages that often confuse you more than actually give you facts annd help you make an informed purchase. We just give you facts, very often straight up to help you actually know what you are buying.

Get technical help for your washing machine, dishwasher, cooker and other appliances in our help and support forums To get more help or advice with choosing a new then please click here to use the support forums
Get spares help and advice for washing machines, dishwashers, ovens, tumble dryers and more from our spare parts experts Contact us for spare parts using our online contact form, simply click here to get in touch about your

Get More Information

Get more information about a new including known faults, spare parts prices and repair costs using the custom Google search below which will search our forums, the spare parts store and all articles before you buy a new one.