Fault Codes
Cooker And Oven Fault Codes
Fisher & Paykel Wall Ovens
This set of fault codes for a range of Fisher & Paykel wall ovens (we assume that means built in ovens) and may also cover some other Fisher & Paykel ovens or cookers.
Sadly we do not have a note of the Fisher & Paykel oven model numbers that these error codes relate to.
These error codes may not relate to ALL Fisher & Paykel branded built in ovens.
Fisher & Paykel Oven Fault Codes
These fault codes are written for oven and cooker repairers and not for the general public by Fisher & Paykel and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a oven or cooker please refer to our basic fault finding guide from this link before you begin.
We have purposely not listed any Fisher & Paykel spares in this article as there is a large range of spares used by Fisher & Paykel and, we can't say for sure which models that these codes will relate to.
|
A1 |
CCU did not reset |
|
C1 |
Oven temperature exceeds 305˚C |
|
F1 |
Ambient (room) temperature exceeds 85˚C |
|
F2 |
Meat probe temperature has exceeded 110˚C |
|
F4 |
Shorted or open circuit ambient temperature sensor |
|
F5 |
Short circuit oven temperature sensor |
|
F7 |
Meat probe sensor is short circuited |
More Fisher & Paykel Oven Help, Advice And Guidance
Should you need more help and guidance please use the links from this article as most of them will help you to understand your oven a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.In addition you can post in our forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other oven or cooker:
Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Fisher & Paykel oven model please post a request to confirm this in the forums.
|
Click here for spare parts in our store email us on spares@ukwhitegoods.co.uk for spare parts Or call on 0845 172 8002 |
Can't Find It? Need More Help With Your ?
Buying spare parts or getting help for any oven or cooker and even choosing a service engineer can range from the simplest task in the world to one of the most daunting as you try to pick your way through model numbers, serial numbers, ranges and all sorts of information. We try to make this as simple as possible for you and take out any hassle but, sometimes, we know that we all need a little help from the experts.
| To get technical help for an oven or cooker then please click here for oven and cooker support forums | |
| Contact us for spare parts using our online contact form, simply click this link for our contact page |
Get more information about your from UK Whitegoods for faults, spare parts and repairs using the custom Google search below which will search our forums, the spare parts from the store and all articles.
| All contents © 2003-2013 UK whitegoods Limited. Brand logos and images for informational purposes only |
| Washing Machine Parts | Cooker & Oven Spare Parts | Tumble Dryer Spares | Fridge Freezer Spare Parts | Dishwasher Spares | Cooker Hood Spares | Cleaner Spares | Fridge Water Filters |

With notes on where to get the best help at the end of each line:
Spares Help - From the store "Contact Us" option or spares@ukwhitegoods.co.uk
Technical Help - Please use the forums
How To Repair Problems - Please use the forums