Shop For Domestic Appliance Spare Parts

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and will help you find any part you need and get it to you as fast and cheap as possible

  Use this link to email us, tell us what you need and we'll do all the work for you
shop spare parts

Beko 5 LED Dishwasher Fault Codes

User Rating: 2 / 5

Star activeStar activeStar inactiveStar inactiveStar inactive

Beko dishwasher error codes and spare partsFault or error codes used in dishwashers produced by Beko for a wide range of brands including Lamona, Beko and others.

These dishwasher fault codes will displayed as a digital code, exactly as you will see below, in an LED or LCD panel or display on the dishwasher door.

Before you start any investigation of the fault or even open your Beko dishwasher please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying Beko spares from our store here and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can find a local dishwasher engineer using our engineer search facility.

  Beko Dishwasher Fault Codes And Test

Like other fault codes these written for dishwasher repairers and not for the general public by Beko and they assume a certain level of competence on the part of the user in diagnostic routines. We may have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a dishwasher please refer to our basic fault finding guide from this link before you begin.

Please check that any Beko dishwasher spares recommended are suitable for use on your particular model and production code or serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your dishwasher. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

  Dishwasher Function Test

Functional test is a special sequence of program steps dedicated for service purposes.

During the test some fault conditions can be detected by the electronics and shown through program indicator lights as shown in the error codes below. It should be noted however that not all faults can be detected and that the problem may have to be diagnosed by the repairer.

In order to enter the functional test mode, while the dishwasher is switched off press the start/stop and program selection buttons together and hold them while powering up the dishwasher, keep holding the buttons for 3 seconds.

All of the indicators light on for 2 seconds after entering the test mode.

Program indicator lights will flash if there are any faults held within the memory of the control system.

After entering the test mode, start the program by pressing the “start/stop” button.

Short program follows the steps below:


Drain out functional test Approximately 30 seconds


Water fill functional test Approximately 4 litres


Water circulation, heating and detergent functional test Approximately 60 seconds


Water circulation and heating functional test Approximately 2 minutes


Drain out functional test Approximately 30 seconds


Water regeneration functional test Approximately 60 seconds


Water inlet and draining to clear resin container Approximately 3 litres


Drain out functional test Approximately 30 seconds

During the test program, if any errors or faults are detected then they will be displayed in the manner as shown below for fault codes.

  Dishwasher Fault Code Lights Legend

This is our very simple legend to show the state of the lights, lamps or LED's as they are unlit, flashing or lit continuously.

LED or light not lit Light or LED not lit LED or light flashing Light or LED flashing LED or light lit and not flashing Light or LED lit solid, no flash

  Beko Dishwasher Fault Codes

LED or light not lit

LED or light not lit

LED or light not lit

LED or light not lit

LED or light not lit

No fault detected


LED or light lit and not flashing

LED or light not lit

LED or light not lit

LED or light not lit

LED or light not lit

No incoming water detected or fill timeout


LED or light not lit

LED or light lit and not flashing

LED or light not lit

LED or light not lit

LED or light not lit

Water inlet valve or flowmeter (water counter) is faulty


LED or light not lit

LED or light not lit

LED or light lit and not flashing

LED or light not lit

LED or light not lit

NTC error


LED or light lit and not flashing

LED or light lit and not flashing

LED or light not lit

LED or light not lit

LED or light not lit

Heater error


  More Beko Dishwasher Help, Advice And Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your dishwasher a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you. But if you are in any doubt at all or don't think you are up to diagnosing the fault yourself please click here to find a local dishwasher repair technician.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very clear to anyone that decides to investigate one of these or any other dishwashers:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

Be aware that these Beko dishwasher fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them.

Please also note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Beko dishwasher model please post a request to confirm this in the forums.

Limona HJA8630 dishwasher
After selecting the program wash and then pressing the start button nothing happens
BEKO DW 600 All light on
Hi, my daughters dishwasher is currently showing all program green lights lit at the same time.
There is no response from the machine irrespective to what buttons are pressed, it just appears to locked down.
Any advice will be much appreciated.
PS. I have noticed this problem mentioned on a couple of other occasions without ant response.
Hopefully third time lucky.
Thanks in advance

Beko dsfs1531w
Hello my beko dishwasher went through the fault cycle no lights flashed on the top but when it came to heating the water it makes a pulsing noise from the pump and heater and then the wash,dry,end lights started flashing does anyone know what this fault could be? Thanks in advance
Fault code 0415. Can\'t find out what it means. Please help
Geoff Fox
DW603 .Not completing a cycle .No heating end ,therefore all cold and wet
machine 21/2 years old.has worked flawlessly on position 4 ( quick and clean 60 deg.) for ALL types of cleaning.Now, has gradually degenerated, going to within the final heat cycle before holding . All items clean and cold and wet ,as you would expect. help please,( presume programmer part is U/S. Thank you.
More likely just an element or thermostat.

But for diagnostic help please use the forums.

Problem with filling of water
Hello, I have problem with BEKO dishwasher machine model DSFN 1530. First I had problem with draining of water but after I dismantled all and clean draining I have problem with filling of water (there are no water in machine). I checked water supply and it\'s OK. Could you send me your opinion and suggestion for repair? Thank you in advance. Best regards. Jasmin
how to repair beko dish washing machine
Lisa Fernley
lights all on
John Graham
My Beko DE2431 FW was failing to complete a full wash programme. After running a functional test (which showed no errors)the machine is working again on the standard programmes. Thanks

2000 Characters left

  Get Parts

Get the  spare parts you need in our store at low discounted prices.

shop spare parts

  Parts Email

Looking for a part you need? Just drop us a mail and we'll find it for you fast.

Or call us on
01563 557156

Find a washing machine repair technician
  Get It Repaired

Time to call in the professional repairman? Contact repair companies directly and save on repair costs with our free search

Find a local approved service technicians to repair your appliance

free appliance diagnostic help
  Self Repair Help

Stuck with an appliance fault or problem and need technical or fault diagnostic help? Just use our totally free to use forums for diagnostic help from appliance repair technicians.

Use our forums to get free help and assistance directly from appliance experts in our forums

more diagnosis & repair help

fault or error codes

All the error and fault codes that we've come across published along with what they mean and what you can do about it to repair your appliance Read More

spare parts information

A wealth of articles that can help you to identify spare parts, diagnose specific spare parts and ordering advice to make sure you get what you need when it comes to parts Read More

support forums

Get help from experienced appliance engineers diagnosing problems with just about any major kitchen appliance you can think on in the UK, almost all have been seen by the engineers that will help you for free if they can Read More

get your appliance repaired

If you don’t fancy trying to repair the machine yourself or, think you need a little professional assistance from an appliance engineer you can find a local engineer here using out free search Read More