Fault or error codes used in dishwashers produced by Indesit for Hotpoint, Ariston and Indesit.
These dishwasher fault codes will displayed as a binary code, exactly as you will see below, using the LEDs in the panel or display on the dishwasher door.
Please remember to support our site by buying Hotpoint spares from our store here and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can find a loacal repair company using our engineer search facility
Like other fault codes these written for dishwasher repairers and not for the general public by Indesit Group and they assume a certain level of competence on the part of the user in diagnostic routines. We may have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a dishwasher please refer to our basic fault finding guide from this link before you begin.
Please check that any dishwasher spares recommended are suitable for use on your particular model and production code or serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.
It is usually necessary to 'reset' the machine after a fault code has been displayed.
To reset please follow the steps below.
If an error still exists or persists after this has been carried out then you will have to investigate the fault or call a dishwasher engineer.
This is our very simple legend to show the state of the lights, lamps or LED's as they are unlit, flashing or lit continuously.
| Light or LED not lit | Light or LED flashing | Light or LED lit solid, no flash |
|
|
|
|
|
Overflow error
|
|
|
|
|
|
Pump timeout, or software recognition error (timer not programmed, wrong keypad)
|
|
|
|
|
|
Circulation pump not working
|
|
|
|
|
|
Not filling
|
|
|
|
|
|
Heater error
|
|
|
|
|
|
Inlet valve not working
|
|
|
|
|
|
Thermistor (NTC) circuit not working
|
|
|
|
|
|
Temp not reached whilst heating (poss. NTC detached from casing)
|
Should you need more help and guidance please use the links from this article as most of them will help you to understand your dishwasher a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.
In addition you can post in our forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you. But if you are in any doubt at all or don't think you are up to diagnosing the fault yourself please click here to find a local dishwasher engineer.
You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other dishwashers:
Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular dishwasher model please post a request to confirm this in the forums.
These fault codes may apply to models not listed.
AS150, AS150X, LI45UK
BCI45, DC27P
D41UK
Can't Find It? Need More Help With Your ?
Getting help, buying spare parts or getting a service engineer for can range from being a simple task to a difficult one as you try to pick your way through model numbers, serial numbers, ranges and all sorts of information. We try to make this as easy as possible for you.
| To get technical help with your then please click here for our help and support forums | |
| Contact us for spare parts using our online contact form, simply click this link to get in touch |
Get more information faults, spare parts and repairs using the custom Google search below which will search our forums, the spare parts store and all articles.
With notes on where to get the best help at the end of each line:
Spares Help - From the store "Contact Us" option or spares@ukwhitegoods.co.uk
Technical Help - Please use the forums
How To Repair Problems - Please use the forums