Hotpoint Aquarius Dishwasher Fault Codes

Fault or error codes used in Aquarius range dishwashers produced Hotpoint however these codes may apply to a few other brands as well.

These dishwasher fault codes will displayed as a binary code, exactly as you will see below, using the LEDs in the panel or display on the dishwasher door.

Please remember to support our site by buying Hotpoint spares from our store here and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer from this link.

Hotpoint Aquarius Dishwasher Fault Codes

Like other fault codes these written for dishwasher repairers and not for the general public by Indesit Group and they assume a certain level of competence on the part of the user in diagnostic routines. We may have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a dishwasher please refer to our basic fault finding guide from this link before you begin.

Please check that any dishwasher spares recommended are suitable for use on your particular model and production code or serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

Fault Code Lights Legend

This is our very simple legend to show the state of the lights, lamps or LED's as they are unlit, flashing or lit continuously.

Light or LED not lit

Light or LED flashing

Light or LED lit solid, no flash

Hotpoint Aquarius Dishwasher Fault Codes

More Hotpoint Aquarius Dishwasher Help, Advice And Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your dishwasher a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you. But if you are in any doubt at all or don't think you are up to diagnosing the fault yourself please the engineer search.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

• We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
• We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
• We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
• No warranty is inferred, implied or given.

Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Hotpoint dishwasher model please post a request to confirm this in the forums.

Applies To Dishwasher Models

These fault codes may apply to models not listed.

Hotpoint Dishwasher

DWF40P, DWF40P.2, DWF50N, DWF50P, DWF50PT, DWF50S, DWM55A, DWT10P, DWT10P.2, FDW20P, FDW60G, FDW60P, FDW60T, FDW65A