Fault or error codes used in Aquarius range dishwashers produced Hotpoint that have a model number starting with FDF however, these error codes may apply to a few other dishwasher brands as well.
These dishwasher fault codes will displayed as a binary code, exactly as you will see below, using the LEDs in the panel or display on the dishwasher door.
Please remember to support our site by buying Hotpoint spares from our store here and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a local Hotpoint dishwasher repairer using our engineer seach facility.
Like other fault codes these written for dishwasher repairers and not for the general public by Hotpoint and they assume a certain level of competence on the part of the user in diagnostic routines. We may have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a dishwasher please refer to our basic fault finding guide from this link before you begin.
Please check that any dishwasher spares recommended are suitable for use on your particular model and production code or serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.
A01 |
A-1: Overfilling
|
A02 |
A-2: Water inlet valve error or turbine error, dishwasher not filllling with water
|
A03 |
A-3: Dishwasher times out when draining - water will not drain
|
A04 |
A-4: Error detected on thermistor circuit
|
A05 |
A-5: Circulation pump blocked or faulty
|
A06 |
A-6: Water inlet times out, dishwasher not filllling with water
|
A07 |
A-7: Turbine faulty - electronic module has detected no turbine rotation
|
A08 |
A-8: Heating phase has timed out - dishwasher fails to heat the water
|
A09 |
A-9: Software recognition error - EEPROM error
|
A10 |
A-10: Heating circuit error detected
|
A12 |
A-12: Communications error between control boards
|
A13 |
A-13: Non-operative electroniuc control module
|
Should you need more help and guidance please use the links from this article as most of them will help you to understand your dishwasher a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.
In addition you can post in our forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you. But if you are in any doubt at all or don't think you are up to diagnosing the fault yourself please the engineer search.
You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other dishwashers:
Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Hotpoint dishwasher model please post a request to confirm this in the forums.
These fault codes may apply to models not listed.
FDF780, FDF784
Buying spare parts for any dishwasher or getting a service engineer can range from the simplest task in the world to one of the most daunting as you try to pick your way through model numbers, serial numbers, ranges and all sorts of information. We try to make this as simple as possible for you and take out any hassle but, sometimes, we know that we all need a little help from the experts.
| To get technical help for a dishwasher then please click here to use our dishwasher forum | |
| Contact us for spare part using our online contact form, simply click this link for our contact page |
With notes on where to get the best help at the end of each line:
Spares Help - From the store "Contact Us" option or spares@ukwhitegoods.co.uk
Technical Help - Please use the forums
How To Repair Problems - Please use the forums