This set of fault codes for the ISE 1607 washing machines and may not relate to other models.
These error codes will not relate to ALL ISE washing machines. If you are unsure please ask in the forums as well as for all other ISE washing machine fault codes.
Please remember to support our site by buying spares from our spare part store here and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer from this link.
The codes are, from the UK Whitegoods Fault Code Guide are as below.
These fault codes are written for washing machine repairers and not for the general public by ISE and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our basic fault finding guide from this link before you begin.
We have purposely not listed any ISE washing machine spares in this article.
Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.
|
=== |
Imbalanced load detected Check load size and ensure that the load can spread evenly around the drum. Individual and unusual items can cause this error to appear, such as washing a single item, bath mats and so on. |
|
F10 |
Overflow Too much water in the machine or the drain pump is running but the machine is empty. Check for the machine being overdosed with detergent, this can cause the machine to think it has overfilled. |
|
F11 |
Water Outlet Fault The drainage pump has been running for 3 minutes. Water remains in the machine. Check that no objects are stuck in the drainage hose outlet. |
|
F12 |
Water Inlet Fault If the correct water level is not achieved within 5 minutes the wash cycle will be interrupted. Check that the tap on the water pipe is open. |
Should you need more help and guidance please use the links from this article as most of them will help you to understand your ISE washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.
In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.
You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:
Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular ISE washing machine model please post a request to confirm this in the forums.
Buying spare parts for any washing machine or getting a service engineer can range from the simplest task in the world to one of the most daunting as you try to pick your way through model numbers, serial numbers, ranges and all sorts of information. We try to make this as simple as possible for you and take out any hassle but, sometimes, we know that we all need a little help from the experts.
| To get technical help for a washing machine then please click here for our washing machine forum | |
| Contact us for spare parts using our online contact form, simply click this link for our contact page |
With notes on where to get the best help at the end of each line:
Spares Help - From the store "Contact Us" option or spares@ukwhitegoods.co.uk
Technical Help - Please use the forums
How To Repair Problems - Please use the forums