Hotpoint BWM12 And BWD12 Integrated Washer Dryer Fault Codes

These fault codes are displayed as a series of flashing LEDs or lights on many popular washer dryer models from Hotpoint but actually made by Indesit and sold under the Indesit, Ariston and Hotpoint brand names using what is known as the EVO2 software.

What most people see is that the program dial or control knob on the washing machine just spins around and the light flashes. The trick is to count the number of flashes between pauses, this tells you the error code. What is listed below is what those flashes mean, after that you need to work out what the faulty component could be and how to repair a washing machine just as we would have to.

If there are no flashes but door lock led lit and appliance fails to start check door lock, motor heater and associated connections 


Hotpoint Integrated Washer Dryer Electronic Controller Replacement

These PCB's are often model specific, that is to say that they are dedicated to a particular model or range of model numbers that share the same basic features, do not take it for granted that because they all use the same fault or error code reporting system that they are all the same because they're not. It is also not the case that when it says that there's a communication error or suchlike that the electronic control board is faulty, if you choose to replace it you do so completely at your own risk.

The boards from Indesit will also often need to be programmed. This is done using a program on a laptop (that only Indesit has) or using a pre-loaded card that can be used with a special tool to flash the EEPROM in the washing machine or washer dryer. If you do not have access to either of those and your electronic control PCB needs changed, you will not be able to do it yourself unless you get someone to pre-configure the board for you. Trouble is, you only know if it's correct when you fit the replacement controller.

Most of our approved repairers will be able to carry out these sorts of repairs for you at a reasonable cost.

Before you start any investigation of the fault or even remove the lid of the washing machine or washer dryer please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying Hotpoint washing machine spares from our store and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a Hotpoint washwer dryer repairer from our engineer search.

Hotpoint Washer Dryer Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Hotpoint and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our washing machine fault finding guide from this link before you begin. You would also be advised to read our guide on how to repair a washing machine.

Please check that any Hotpoint washing machine spares recommended are suitable for use on your particular model and serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine or washer dryer. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

1

Short circuit motor triac on electronic module
  • Check wiring
  • Check electronic controller

2

Motor detected as being jammed or motor tacho fallen off
  • Check for objects trapped in the drum
  • Check motor connector block
  • Check wiring
  • Check motor carbon brushes
  • Check tacho connections
  • Check motor

3

NTC fault - temperature sensor detected as either open circuit or shorted
  • Check wiring to temperature sensor
  • Check thermistor

4

Pressure switch jammed on empty
  • Check for blockages in pressure switch hose
  • Check wiring to level sensor
  • Check pressure switch is not defective
  • Water inlet valve locked open

5

Pressure switch jammed on full
  • Check for overfoaming evidence - can trip pressure switch
  • Check for blockages in pressure switch hose
  • Check wiring to level sensor
  • Check pressure switch is not defective
  • Water inlet valve locked open

6

Program selector management error
  • Check wiring
  • Check electronic control PCB

7

Heater relay stuck
  • Check wiring
  • Check electronic control PCB

8

Heater relay cannot be activated
  • Check wiring
  • Tap relays as they can jam on new boards
  • Check electronic control PCB

9

Incompatible EEPROM
  • Reflash EEPROM
  • Check electronic controller

10

Pressure switch or level sensor not sensing correctly
  • Check wiring and harness 
  • Check level sensor
  • Check electronic control module

11

Drain pump cannot be activated
  • Check that filter is not blocked or obstructed
  • Check drain hose is clear of any blockage or obstruction
  • Check wiring to drain pump
  • Check drain pump is not defective
  • Check level sensor or switch
  • Check wiring to level sensor

12

Not used
  • This error code is not used and should not be displayed

13

Dryer fan does not work
  • Check dryer NTC (temperature sensor)
  • Check dryer fan motor
  • Check wiring
  • Check electronic controller

14

Dryer element detected as open circuit or short
  • Check wiring
  • Check dryer heating element

15

Dryer element relay on board not working
  • Check wiring
  • Check electronic controller

Hotpoint Washer Dryer Spares

We have deliberately not given links to any spares in this article and, as you may suspect from this guidance, with very good reason.

Indesit Group appliances are found using two key pieces of information, what the washer dryer model number is and the serial number from the rating plate. We can often find them from the model number because we can eliminate multiple instances on occasion and, we know what we're looking at and for, you often won't. But, even with our knowledge even we will often need the serial number or production code to identify the machine correctly and, accordingly, the spares required.

Our advice is very simple, don't guess at it and end up with the wrong parts, contact us from this link and check that you are ordering the correct Hotpoint spares.

More Hotpoint Washer Dryer Help, Advice And Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Hotpoint washer dryer a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

      • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
      • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
      • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
      • No warranty is inferred, implied or given.
You also have to understand that fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them. As, if you don't and tell the engineers in the forums that you hooked up components to a live feed, worked on a live appliance and so on they will be a whole heap less willing to help you in our washing machine forum because they will assume that you are trying to commit suicide and are not safe working on your machine.

Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Hotpoint washer dryer model please post a request to confirm this in the forums.

Add comment

Please do not use the comments box if you need the following.
With notes on where to get the best help at the end of each line:
Spares Help - From the store "Contact Us" option or spares@ukwhitegoods.co.uk
Technical Help & Support - Please use the forums
How To Repair Problems - Please use the forums


Security code
Refresh

 

Find Local Service Engineers

Find a domestic appliance service engineer to repair your washing machine, dishwasher, cooker, oven, fridge or any other major domestic appliance
Find a local approved service engineer to repair your

Spares

Appliance spares for washing machines, washer dryers, cookers, ovens, hoods, dishwashers and all other major appliances

Get spare parts in our store

email us on spares@ukwhitegoods.co.uk for spare parts

Or call on 0845 172 8002

Pay for spare parts using all major credit and debit cards and also instant ant payments using PayPal and Amazon for parts

Forum Support

Appliance help and support forums where you can talk to actual domestic appliance engineers about washing machines, cookers, dishwashers, fridge freezers and more
Get help from experts in our forums
Banner

Can't Find It? Need More Help With Your

Getting help, buying spare parts or getting a service engineer for can range from being a simple task to a difficult one as you try to pick your way through model numbers, serial numbers, ranges and all sorts of information. We try to make this as easy as possible for you.

Get technical help for your washing machine, dishwasher, cooker and other appliances in our help and support forums To get technical help with your then please click here for our help and support forums
Get spares help and advice for washing machines, dishwashers, ovens, tumble dryers and more from our spare parts experts Contact us for spare parts using our online contact form, simply click this link to get in touch

Find More Information

Get more information faults, spare parts and repairs using the custom Google search below which will search our forums, the spare parts store and all articles.

Loading


http://sandsspares.co.uk/