Shop For Domestic Appliance Spare Parts

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and will help you find any part you need and get it to you as fast and cheap as possible

  Use this link to email us, tell us what you need and we'll do all the work for you
Shop for domestic appliance spare parts

Haier Washing Machine Fault Codes (General)

User Rating: 5 / 5

Star activeStar activeStar activeStar activeStar active
 

Haier washing machine error codesThese fault codes are for Haier washing machines that have a digital LED segment type display but we cannot be completely sure which particular Haier washing machine models that they apply to.

Before you start any investigation of the fault or even remove the lid of the washing machine please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying spares from our spare part store and, if you decide that you really need an engineer to repair your washing machine please support the local repairers that help make this site possible.

  Haier Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Haier and UK Whitegoods, they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our basic fault finding guide from this link before you begin.

Some of the translations to English of these fault codes was, politely put, questionable and have had to be reconstructed as best possible.

  Haier Washing Machine Spare Parts

We have purposely not listed any Haier washing machine spares in this article, mainly as they are generally difficult to obtain (very problematic and subject to delays) and expensive when you can get them. As a general rule we tend to avoid them. In fact, mostly given our experience with Haier, the best thing to do is not to buy one in the first place.

Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

Err1

Washing Machine door detected as not closed

The fault code is displayed, if the washing machine does not detect that the door has been closed after twenty seconds.

  • Check door is closed correctly
  • Cycle the power on the machine
  • Check wiring to door lock is secure
  • Check PCB

Err2

Water has failed to drain from the washing machine

This faut code is displayed should the washing machine or washer dryer fail to drain water from the tank.

  • Check drain pump
  • Check wiring
  • Check water level sensor
  • Check connections to water valve and PCB

Err3

Wash temperature sensor error detected

A fault has been detected with the washing thermistor or temperature sensor.

  • Check connections to wash temperature sensor
  • Check temperature sensor

Err4

Wash heating element failure detected

A fault has been detected were the element is not heating.

  • Apparently overloading can cause this error and the cure is to reduce the load
  • Check wash heating element
  • Check wiring
  • Check thermistor

Err5

Water level not reached

The pre-determined water fill level has not been reached in approximately eight minutes.

  • Check for any leaks causing the water level to drop
  • Check if the water supply is okay
  • Check water inlet valve
  • Check wiring to water inlet valve
  • Check wiring to PCB
  • Check PCB

Err6

Washing machine motor speed detected

A fault has been detected with the speed of the main drive motor.

  • Check motor connection block
  • Check motor tacho unit
  • Abnormal loading condition
  • Check wiring to motor

Err7

Washing machine motor overheat protection error detected

An overheating fault has been detected with the main drive motor or the TOC in the motor has failed.

  • Check motor connection block
  • Check wiring to motor
  • Check motor

Err8

Water level exceeds maximum value

The washing machine has been detected as overfilling with water and the safety level on the pressure sensor has been activated.

  • Check wiring to pressure sensor
  • Check pressure sensor
  • Check pressure hose for blockage or evidence of over soaping

  More Haier Washing Machine Help, Advice And Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Haier washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

Warning: fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what washing machine fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them.

Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Haier washing machine model please post a request to confirm this in the washing machine forum.

Gravatar
karen
Haier HWMP75-918
The water keeps on filling. It wont sense the level I need and stop and wash. Just keeps filling until it all spills on the floor. Help please!
Gravatar
Kenneth
Most probably a blocked or faulty water pressure sensor.
Gravatar
Sandra Fulford
Where is the sensor please
Gravatar
bron
I have just bought a Haier HWMP-75-918 7.5kg second hand and I turned it on and it beeps 5 times and than FA flashes on the control panel??

2000 Characters left


Spare Parts

Appliance spares for washing machines, washer dryers, cookers, ovens, hoods, dishwashers and all other major appliances

  Buy Parts

Get the  spare parts you need in our store at low prices.

Shop for appliance spare parts

  Parts Email

Looking for a part you need? Just drop us a mail and we'll find it for you fast.

 

Or call us on
01563 557156

Repairs

Find a domestic appliance service engineer to repair your washing machine, dishwasher, cooker, oven, fridge or any other major domestic appliance
  Get It Repaired

Time to call in the professional repairman? Contact repair companies directly and save on repair costs with our free search

Find a local approved service technicians to repair your appliance

Online Support

Appliance help and support forums where you can talk to actual domestic appliance engineers about washing machines, cookers, dishwashers, fridge freezers and more
  Self Repair Help

Stuck with an appliance fault or problem and need technical or fault diagnostic help?

Use our forums to get free help and assistance directly from appliance experts in our forums

more diagnosis & repair help

fault or error codes

All the error and fault codes that we've come across published along with what they mean and what you can do about it to repair your appliance Read More

spare parts information

A wealth of articles that can help you to identify spare parts, diagnose specific spare parts and ordering advice to make sure you get what you need when it comes to parts Read More

support forums

Get help from experienced appliance engineers diagnosing problems with just about any major kitchen appliance you can think on in the UK, almost all have been seen by the engineers that will help you for free if they can Read More

get your appliance repaired

If you don’t fancy trying to repair the machine yourself or, think you need a little professional assistance from an appliance engineer you can find a local engineer here using out free search Read More