Liebherr CNes Fridge Freezer Fault Codes

Error or fault codes that are displayed on Liebherr CNes range freezer models and these fault codes may or may not be the same as are used on other Liebherr fridge freezer models, most of which will have a control panel which looks the same or similar to the picture below. All these models are frost free and all will have an electronic display panel of some kind fitted.

The error code is displayed as a binary code using the LEDs to display the error codes as shown below in the format of the ˚C LEDs lit in combination give the fault code. These fault codes are displayed as flashing LEDs and all will flash in conjunction with the SuperFrost LED.

Since the fault codes for these Liebherr freezers for the general public's use they may not offer a lot of help in many cases. For the service engineer they give a steer in the right direction but, that's about it really. Beyond the general meanings it is down to investigation and proper fault diagnosis.

Please remember to support our site by buying spares from our spare part store here and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer from this link.

The codes are, from the UK Whitegoods Fault Code Guide are as below.

Liebherr CNes Fridge Freezer Fault Codes

These fault codes are written for appliance repairers and not for the general public by Liebherr and they assume a certain level of competence and in some cases specific training on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on refrigeration please refer to our basic refrigeration fault finding guide from this link before you begin.

Further help on how frost free refrigeration works can be found in this article.

Please check that any Liebherr spares recommended are suitable for use on your particular model and serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your fridge freezer. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

More Help, Advice & Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Liebherr fridge freezer a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

• We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
• We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
• We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
• No warranty is inferred, implied or given.

Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Liebherr fridge freezer model please post a request to confirm this in the forums.