Author: p0xy, Posted: Sat Sep 11, 2004 1:25 pm Post subject: Zanussi FJ 1296 washing machine
I have a zanussi fj 1296 washing machine and when i turn it on i can hear the pump but nothing else. I have tried putting it on a wash and aspin but the drum doesnt move at all. Is it easy to change the motor and if it is how much does a one cost? I have had it about 6 years and this is the first thing that has gone wrong with it... please help
thanks
Author: Toni, Location: Cheshunt, HertsPosted: Sat Sep 11, 2004 1:34 pm Post subject: Re: Zanussi FJ 1296 washing machine
Hi
I assume you have no motor action on wash or spin?
Before you go changing the motor, I would suggest you check the carbon brushes on the motor, you may find they are worn away completely
Toni
Author: streetlighter, Location: Sunny mid BedfordshirePosted: Sat Sep 11, 2004 4:14 pm Post subject: Re: Zanussi FJ 1296 washing machine
Hi pOxy
Watch the fill. If she starts to fill to far up the door you must get the w/m serviced as it may flood your floor.
If fill is normal and no wash or spin, but pumps out ok then it could be carbons.
If she washes and does not spin she needs a service.
(Tricky on these so call an engineer in.)
I asume you mean she fills and just sits idle
Author: p0xy, Posted: Sat Sep 11, 2004 7:28 pm Post subject: Re: Zanussi FJ 1296 washing machine
Ye the washer fills and empties, but it doesnt go round at all spin or on a wash cycle
Author: Martin, Location: HampshirePosted: Sun Sep 12, 2004 7:26 am Post subject: Re: Zanussi FJ 1296 washing machine
p0xy wrote:
Ye the washer fills and empties, but it doesnt go round at all spin or on a wash cycle
The problem will be as Toni has suggested and you need to check that out OR better still get an engineer in to do it
Martin
Author: p0xy, Posted: Sun Sep 12, 2004 9:14 am Post subject: Re: Zanussi FJ 1296 washing machine
Ok will get an phone an engineer tomorrow thanks
Author: Toni, Location: Cheshunt, HertsPosted: Sun Sep 12, 2004 9:46 am Post subject: Re: Zanussi FJ 1296 washing machine
Look on the directories section, you may find a member that covers your post code area