Announcement

Collapse
No announcement yet.

Rancho K59 Thermostat not cutting out

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rancho K59 Thermostat not cutting out

    I have a bit of an odd situation.

    I have ordered a replacement thermostat for my fridge from 2 different supplier but this issue seems the same. The stat doesn't cut out ever and the fridge gets iced up

    Fridge is a drawer fridge NCD 191L from hotpoint

    Thermostat is
    K59
    Part Number J00155457
    Ref: C00140702

    Even if I put the that in a freezer (as oppposed to in my fridge) it doesn'h cut out. I cant hear it click.

    The original part I replaced when I adjusted one of the screws I could make it click in and out but it seemed unreliable

    Could there be a generic manufacturing fault at Rancho themselves

    Literature seems to indicate you don't adjust these yourselves

    Generally with a stat I expect to find in its temperature range a case where it will click out at room temperature...

    Any ideas folks....


    Cheers

    Gav
    Last edited by kwatt; 07-11-18, 09:47 PM.

  • #2
    from the pictures I found this stat has 3 connection as only 2 operate as a thermostat are you sure you have the wires in the correct place ?

    Dave

    Comment

    Affresh

    Collapse
    Working...
    X