Announcement

Collapse
No announcement yet.

Hotpoint slimline SDL510 lights flashing

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hotpoint slimline SDL510 lights flashing

    When switched on my dishwasher start sequence; 1. dishwasher drains 2. Solenoid opens and water flows into dishwasher 3. 1 & 3 lights flashes 4. Dishwasher drains. Lights remain flashing? Can you help. Thanks
    Last edited by don; 21-12-18, 07:30 PM.

  • #2
    Mesh plate, filter or microfilter, pressure switch,
    circulation pump.

    Sadly in most cases this is a main circulation pump/motor failure, quite common on Indesit made appliances.
    Nothing really matters much, and hardly anything really matters at all.

    Comment


    • #3
      Thanks iadom for your quick response and pointing me in the right direction. Checked dishwasher today and found the pressure switch pipe blocked, used a bicycle pump to unblock. Run machine and it ran for a longer time before the two light flashed, cleared the pipe again and the machine carried out a complete rinse cycle. Obviously there is stil debris in the bottom 0f the dishwasher filter area, once the machine has completed a complete wash sequence i will add a cleaning agent. Once again thank you and have a good Christmas.

      Comment

      Cheap Spare Parts

      Collapse

      Affresh

      Collapse
      Working...
      X