Announcement

Collapse
No announcement yet.

Beko dishwasher not heating water

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Beko dishwasher not heating water

    Hi,
    I have a Beko DIN15210 dishwasher that has stopped heating water. Having replaced the flow through heater and thermal sensor, as well as checked the wiring I have looked at the PCB. Thereís a HF3FA relay, is this the relay that controls the heating circuit? Itís cheap to replace and I was wondering if itís worth a go before I give up!
    Many thanks in advance.
    Last edited by kwatt; 31-12-18, 12:21 PM.

  • #2
    I would say yes give it a try as the relay is for the heater. Have a good look at the relay soldered joints first as these can be a source of failure as well

    Dave

    Comment


    • #3
      Well....relay replaced and still no hot water. Iím at a loss as to what the problem is *♂️

      Comment


      • #4
        i assume you have checked for wiring breaks after that its a board problem

        have had a few older board with power supply issues. where the voltage on the board was enough to start the machine but not quite enough to pull in the heater relay

        Dave

        Comment

        Cheap Spare Parts

        Collapse

        Affresh

        Collapse
        Working...
        X