Announcement

Collapse
No announcement yet.

Whirlpool ADG 550 door spring problem

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Whirlpool ADG 550 door spring problem

    I purchased dishwasher door cables (1881050100) to replace broken ones, but on opening up the side of my dishwasher I have no idea how to hook the springs that attach to the cables back in place. The spring has a closed loop at one side and an open loop at the other. The closed loop side is the side I'm struggling to find anywhere to attach it to. Any help would be greatly appreciated. Thanks.

  • #2
    have you got this piece ?
    https://www.amazon.co.uk/Whirlpool-4.../dp/B00Y73CWP2

    Dave

    Comment


    • #3
      Yes. How do you attach the spring to it? I can't get the closed end to stretch to get it onto this (assuming it's supposed to clip onto the hole in that part). Thanks

      Comment


      • #4
        will go on somehow

        from what I remember its just a "U" shaped loop but its open at one end so you can prise it up to attach it

        Dave

        Comment


        • #5
          I was worried about doing that in case I damaged it, but glad to know that's all it takes. Thanks so much for your help.

          Comment


          • #6
            you wont damage it. its a spring under a lot of tension so a bit of prising by you is not going to do anything

            Dave

            Comment

            Cheap Spare Parts

            Collapse

            Affresh

            Collapse
            Working...
            X