Announcement

Collapse
No announcement yet.

Lamona HJA 8630

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lamona HJA 8630

    Good Morning,
    Have the above unit, all the programme lights are staying on when unit is switched on, tried unplug from mains.
    Took panel off of door to see any obvious wires off or water ingress around electrical board. All looks OK.
    Could anyone give me an idea of what might have failed please.

    Thanks,
    Last edited by electrofix; 22-05-19, 09:22 AM.

  • #2
    think this is a main board failure. not an uncommon fault when the unit gets older

    https://shop.ukwhitegoods.co.uk/1899...er-control-pcb

    Dave

    Comment


    • #3
      Thanks for the quick reply, will order one.

      Comment


      • #4
        Just to confirm, is it the Control unit, or the display unit that I need, Thanks.

        Comment


        • #5
          control unit

          had this problem when the power supply on the board degrades with age. it boots up but does not have power to complete action. I normally repair the boards to cure it


          although its very likely this is the problem without inspecting the machine I cant promise 100% it will be the answer

          Dave

          Comment


          • #6
            Update, fixed. Replaced the control board.
            Rather than chuck the board away, is there a method to check / repair these. What normally fails.

            Comment


            • #7
              power supply capacitor a large grey or blue block

              Dave

              Comment

              Cheap Spare Parts

              Collapse

              Affresh

              Collapse
              Working...
              X