Announcement

Collapse
No announcement yet.

Bosch SRS55C02GB/01 Clasixx Slimline Low Water Pressure?

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bosch SRS55C02GB/01 Clasixx Slimline Low Water Pressure?

    My dishwasher seems to go through the cycle, drops the tablet but doesn't wash (tablet doesn't dissolve)

    I've good water pressure entering the machine. The inlet filter is clear.

    I'm measuring aprrox 3K7 across the inlet solenoid terminals.

    I've disconnected the impeller jug from the plastic manifold on the rear of the machine and when I run it, water does flow from the impeller but not with much force.

    YouTube clip showing impeller:

    https://youtu.be/5CmJSNNCogY

    How do I confirm if it's the impeller?

    What else may be the problem?

    Thanks for any help

    Nez
    Last edited by electrofix; 04-08-19, 12:13 PM.

  • #2
    wait till it fills and open the door and look at water level

    check all bars for blockages bits of rice, plastic etc

    check its getting hot

    Dave

    Comment


    • #3
      It's filling with water ok I think (the overfill float is just below the point of triggering the microswitch). Water is flowing through the bottom arm, but not enough pressure to make it spin (both arms are clear of debris) but can't see any coming from top arm.

      Normal cycle been running for 10 mins, water still cold

      Comment


      • #4
        had one the other week doing just that on the same system

        ended up being the impellor had split so only the rear plate was going round ro had no pump pressure

        https://shop.ukwhitegoods.co.uk/4190...-seal-kit-7964

        Dave

        Comment

        Cheap Spare Parts

        Collapse

        Affresh

        Collapse
        Working...
        X