Announcement

Collapse
No announcement yet.

Beko dw603 dishwasher not filling with water!

Collapse

Qualtex

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Beko dw603 dishwasher not filling with water!

    My Beko DW603 dishwasher has just stopped filling with water. I have cleaned all the filters out. Checked inlet pipe! Anyone got any ideas? Only 2 years old.

  • #2
    well its starts getting technical from here on in

    check base for water and check overflow switch operation

    check inlet valve coil

    Dave

    Comment


    • #3
      Fairly common that the fill matrix behind the left hand side panel gets a limescale blockage around the internal, I think, blue comma shaped insert you should see through the semi transparent unit near the top. Remove and catch any water with a towel as being removed, turn it upside down and try to blow down where the valve pipe`s nozzle was fitted, any restriction is the cause. The cure is to buy a bottle of Kilrock descaler and pour SOME of it down that nozzle with a dry cloth or wear rubber gloves and if you look very closely you should see it fizzing = limescale present. leave in a w/up bowl for 5 minutes, drain out the Kilrock, clean nozzle of acid residue and blow rhtough to test. Be very careful of Kilrock: eyes mouth & fingers, beware, nasty stuff but this is how I clean out limescale from these matrixs.

      Comment

      Cheap Spare Parts

      Collapse

      Affresh

      Collapse
      Working...
      X