Announcement

Collapse
No announcement yet.

Bosch WTA4409GB/03 Tumble Dryer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bosch WTA4409GB/03 Tumble Dryer

    Hi,

    I recently replaced the heating element in the above, after it stopped heating up.

    It then worked fine for a few weeks, but has now stopped heating up again. Assuming it's not the element again, according to the Bosch manual there are 3 or 4 thermostats / temperature regulators, and at £40-£70 each I don't want to buy them all!.

    Is thermostat P/N 423039 the most likely culprit, or does anyone have any other recommendations / advice?.

    Many thanks

    Peter
    Last edited by iadom; 15-10-18, 04:08 PM.

  • #2
    get a multimeter, set it on the buzz setting

    taking each thermostat in turn, disconnect 1 wire then touch the terminals to both sides of the stat. if it buzzes its ok, reconnect wire and try the next one

    do any of these stats have a reset button ?

    Dave

    Comment


    • #3
      Many thanks Dave, very helpful.

      Haven't seen a reset button. Will test later today and get back to you.

      Thanks again

      Peter

      Comment


      • #4
        Hello Dave,

        Turned out to be that little red reset button you suggested I looked for.

        Many thanks for your help

        Peter

        Comment

        Affresh

        Collapse
        Working...
        X