Announcement

Collapse
No announcement yet.

AEG T56800 condensor dryer, stops after a few minutes

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • AEG T56800 condensor dryer, stops after a few minutes

    Hello, I have an AEG T56800 (Typ: 91 A AD AB 01 A) condenser dryer with PNC 916 012 052 00 and S-No 45047339 (about +/-12 years old) The dryer starts for a few minutes then stops with the end of cycle light flashing and beeping. I have tested the heating elements, changed the motor capacitor, visually checked mainboard for any noticeably damaged components, general cleaning of all parts, none of this seems to help.
    When I try to get stored fault codes, first the start/pause led and end of cycle led flash twice together, then the end of cycle led flashes 4 more times on its own. Any idea what fault is being represented by this flashing sequence? I've been fighting with this for quite some time now and searched and read many posts, I guess I'm just blocked... Many Thanks!
    Last edited by kwatt; 03-06-19, 09:19 AM.

  • #2
    I get alarm code 62

    Dave

    e62.jpg

    Comment

    Cheap Spare Parts

    Collapse

    Affresh

    Collapse
    Working...
    X