Announcement

Collapse
No announcement yet.

Bissell proheat 1698k

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • sutty86
    started a topic Bissell proheat 1698k

    Bissell proheat 1698k

    Bought this model off shpock, rookie mistake didn't fully check before purchasing.
    Live quite far away and guy is refusing refund.
    I'm under the impression it's hopefully an early fix but atm I'm stuck.
    Basically the unit is in good user shape..
    It's basically not spraying water out, both the jets under the brush and the hand tool jet is rubbish, squirts out in intervals very low pressure for around 1 second then stops.

    Brush bar is fine, heater core is fine and clean,
    I can see fluid moving around tubes inside when button is pressed on main unit,around the heat module.

    I think my problem is the tank hose which connects to base.
    It fits onto a nipple on the base, I've tried sticking a screw there but the water just leaks under the connection.

    Any help guys

  • electrofix
    replied
    Re: Bissell proheat 1698k

    check the bottom of the main tank

    if someone has put water that's too hot in the container the base of the container warps upward stopping the water flowing properly

    Dave

    Leave a comment:


  • sutty86
    replied
    Re: Bissell proheat 1698k

    Dam I was hoping for an easy fix
    Thanks

    Leave a comment:


  • don
    replied
    Re: Bissell proheat 1698k

    Hi

    Very few spares are available for these machines and no service back up at all.

    Your best bet is to return it to Bissell repair comes with a guarantee. Not the best news you want to hear but at least it gets you a fully working machine.


    Don

    Leave a comment:

Cheap Spare Parts

Collapse

Affresh

Collapse
Working...
X