Announcement

Collapse
No announcement yet.

ZANUSSI DRUM SEAL

Collapse

Qualtex

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ZANUSSI DRUM SEAL

    COULD ANYBODY PLEASE GIVE ME ANY ADVISE FOR CHANGING THE DRUM SEAL OF A ZANUSSI WDJ1294 WASHER DRYER. THE DRUM SPLITS IN 2 AND HAS A RUBBER SEAL BETWEEN THE TWO HALFS. WHEN SPINNING THIS SEAL LEAKS (TIGHTENING THE BOLTS THAT FIX THE 2 HALFS HELPED, BUT DID NOT CURE).
    THANKS[/i][/b]

  • #2
    Re: ZANUSSI DRUM SEAL

    When you tightened the bolts did they ALL go tight or are some just turning - if so you may need a new rear half, either way it's a pig of a job because the whole tub assembly has to come out and it gets even more fiddley on a washer dryer. Might be better off getting an engineer for this one, see Repairs@.

    Comment


    • #3
      Re: ZANUSSI DRUM SEAL

      You need to remove the whole drum assembly from the machine then split the two halves, a bit of a pig job if you haven't dome one before

      The drum seal is here should you need one:

      http://shop.ukwhitegoods.co.uk/Washing+ ... +Seal.html

      Dave.

      Comment

      Cheap Spare Parts

      Collapse

      Affresh

      Collapse
      Working...
      X