Announcement

Collapse
No announcement yet.

hotpoint wmef 943 puk

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • hotpoint wmef 943 puk

    Can anyone help please?
    Our washer has developed an intermittent fault in that it will run a wash cycle ok but at the end all the lights flash with the code F06 in the main display, also there is a constant clicking from the door lock . When this happens the only way to open the door & reset everything is to power off & open the door with the emergency manual pull.
    Is this likely ( as Ive been told, the door lock itself?
    Thanks
    Last edited by kwatt; 29-12-18, 10:17 PM.

  • #2
    its s door lock fault and the lock is probably the cheapest option

    Dave

    f06.jpg

    Comment


    • #3
      Thanks for that! Ill give it a try as they are only about 15. Is it an easy job to change? I dont see any screws behind the door like older machines, just 2 little plastic bumps!

      Comment


      • #4
        push bumps in at the same time as slide lock to the left. it then unhooks from the door. new one goes back in the same way.

        Dave

        Comment

        Cheap Spare Parts

        Collapse

        Affresh

        Collapse
        Working...
        X