Announcement

Collapse
No announcement yet.

AEG L16830 Water Inlet Valve replacement

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • AEG L16830 Water Inlet Valve replacement

    Hi, I've just purchased a replacement water inlet valve for my AEG L16830 in the hope it will overcome some E10 errors I've been getting during the drying cycle. In replacing the part I've realised I need to remove an extension to the existing valve's threaded inlet hose mouthpiece - however it appears to be some sort of 1-way screw system which has lugs preventing you unscrewing the attachment.

    I'd upload a photo to illustrate but the forum only allows a 19kb limit on uploads and wont accept my OneDrive link?!

    If anyone knows (a) how to unscrew the attachment, or (b) if it's not possible to unscrew where to order a replacement I'd be most grateful.

    Cheers!

  • #2
    It will unscrew with sufficient force.
    Nothing really matters much, and hardly anything really matters at all.

    Comment


    • #3
      Thank for the dose of reassurance - I gave it some proper welly and it did indeed loudly SNAP unlocked, apparently with no ill effects to the connector! All looks good so far, many thanks! Ol.

      Comment

      Affresh

      Collapse
      Working...
      X