Announcement

Collapse
No announcement yet.

Samsung washing machine WF80F5E5U4X

Collapse

Qualtex

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Samsung washing machine WF80F5E5U4X

    Hi everyone. Problem with this Samsung. Sometimes this machine if set, for example, Baby wash at 40 degrees at 1200 spin with 3 rinses =1hour 45 minutes. The machine will fill which is a pulsed fill and the drum goes around but sometimes within say 7 to 8 minutes at 1 hour 39 minutes the drum jerks ( as though it is stuck but isn`t ) and stops and will be like that for MOST of the remaining time to the end. The time remaining will not count down or if it does this programme takes 4 hours to complete! Other times the machine will work just fine as it should. Anyone had experience of this? The motor is a belt driven inverter type. Have megged the heater and that is fine ( it heats the water and is not to earth ) The motor wires seem ok, the valves ok, the p/swt hose is ok. Main pcb perhaps??

  • #2
    Have just done one, was the main pcb
    Regards Murv...

    Comment


    • #3
      Thanks very much for your reply Murv. As expected the pcb.

      Comment


      • #4
        And yes it was the pcb. Many thx

        Comment


        • #5
          Have just done one, was the main pcb
          Last edited by electrofix; 17-09-19, 08:39 AM.

          Comment


          • #6
            Thanks everyone. Has been awhile now and has never gone wrong since so it proves it was the pcb jerking around.

            Comment

            Cheap Spare Parts

            Collapse

            Affresh

            Collapse
            Working...
            X