Announcement

Collapse
No announcement yet.

F & P..GW508 Fault code

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • F & P..GW508 Fault code

    I've done the diag test thing on this. Held down wash temp/pressed power. Wait for it to beep twice. Then press spin till spin/slow LED lights up.

    The long wash LED (I believe you read from right to left on the WM)??

    And the LED beside the spin LED lights up

    So would the fault code be 010000001?

    If I'm reading the service manual right, that means

    65. (01000001) Phase 5 Pressure Transducer Out of Range Error
    Refer to Fault code 66 for action.

    66. (01000010) Phase 5 Pressure Transducer Out of Range Error

    The Motor Controller has received signals from the Pressure Transducer outside normal values.

    Primary Source - Motor Controller Action - Replace Motor Controller
    ?

    Does this sound right to you guys?

    I can still use the washing machine, but once it finishes it beeps like 9 times. I have to turn it off at the wall to turn it off

  • #2
    Re: F & P..GW508 Fault code

    I reprogrammed it and set the size and something else (cant remember what now). But now it turns off after the final spin. So ignore the original post

    Comment

    Cheap Spare Parts

    Collapse

    Affresh

    Collapse
    Working...
    X