Announcement

Collapse
No announcement yet.

Samsung Q1435V and 8E error

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Samsung Q1435V and 8E error

    Hello and thanks for this forum!

    Can any one help me to diagnose 8E error in my washing machine.

    The problem is that motor won't run. Motor just "rattles" and does not do full turns. Multimeter says 4,2ohms between all three wires. So I think motor is OK.

    Could this be PCB failure? Any idea how to fix PCB?
    Or is new PCB only solution?

  • #2
    Re: Samsung Q1435V and 8E error

    Hi

    "8E" is over current error , if motor not turning most likely PCB fault.

    Mike
    [b]For safety remove plug from socket before removing any panels or attempting any repair to your appliance.[/b]

    Comment


    • #3
      Re: Samsung Q1435V and 8E error

      You are unable to fix a PCB board so a new one is the only option there

      Comment


      • #4
        Re: Samsung Q1435V and 8E error

        Thanks for help. PCB was broken. With new PCB machine is running good now.

        I found new PCB for 01435VGW1/XEE from http://www.elfa.se/
        Part number: 96-102-18

        Comment


        • #5
          Re: Samsung Q1435V and 8E error

          Hello, I am after this part also, do you have a direct link as I cannot find it?

          Comment


          • #6
            Re: Samsung Q1435V and 8E error

            Yes usually most times this is a pcb fault.Sometimes the pcb can be repaired but most times need to buy a new one. Samsung here in my country don't have a good service dealership :cry: https://ilektroepvi.gr/????????-??????????/

            Mod edit;
            I have edited your advertising link, if you wish to advertise on this site you need to contact admin@ukwhitegoods.co.uk You are more than welcome to use the forums

            ?????????

            Don

            Comment

            Cheap Spare Parts

            Collapse

            Affresh

            Collapse
            Working...
            X