Announcement

Collapse
No announcement yet.

Disassemble Dyson Cyclone Unit????

Collapse

Qualtex

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • builder
    started a topic Disassemble Dyson Cyclone Unit????

    Disassemble Dyson Cyclone Unit????

    Hello, Everyone!

    My first post in this forum......my Dyson DC-17 Animal sucked up a small animal....(no joke, no pun intended,) which is lodged inside the cyclone unit and smelling to high heaven!

    I need to disassemble the cyclone, as soon as possible, to remedy this! The problem is, two of the four screws at the bottom stage of the cyclone are off to the side, close to the perimeter of the unit, just out of reach of any typical straight-shanked screwdriver.

    Before I go searching the planet for a flexible screwdriver, I'm hoping someone here has sucessfully made such a repair, and can advise me if I am perhaps missing something, regarding the lay-out of the screws inside this cyclone unit.

    Anyone?

    Thanks so much!

    Mark in the United States, where the mice are very small and very easily sucked up!

  • Higher-water-level
    replied
    Re: Disassemble Dyson Cyclone Unit????

    We do not have a DC17 over here. But we have a DC07 and the cyclone assy cannot be dismantled in any way! :rolls:

    I am unsure on any other models, sorry ops:

    All the best
    HTH
    :wink:
    Oliver

    Leave a comment:

Cheap Spare Parts

Collapse

Affresh

Collapse
Working...
X