Dishwasher Spare Parts

Buy dishwasher spare parts in our store at low prices with quick support from our team of dishwasher spare part experts who will help you find and identify dishwasher spare parts

Email us and ask us to find dishwasher parts for you

shop spare parts

User Rating: 1 / 5

Star ActiveStar InactiveStar InactiveStar InactiveStar Inactive
 

Hoover dishwasher error codes and spare partsFault codes used on late model dishwasher models from Hoover that may also be used on some Candy dishwasher models. We're not sure what series or model sthat these fault codes relate to sadly.

Before you start any investigation of the fault or get inside your Hoover dishwasher please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying Hoover spares from our spare part store and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer using the engineer search function.

  Hoover Dishwasher Fault Codes

Like other fault codes these written for dishwasher repairers and not for the general public by Hoover and UK Whitegoods and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a dishwasher please refer to our dishwasher fault finding guide from this link before you begin.

Please check that any Hoover dishwasher spares recommended are suitable for use on your particular model and production code or serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your dishwasher. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

E1

Water fill time out

The dishwasher has failed to fill with water in a reasonable time.

 

E2

NTC fault detected

The dishwasher has detected and error with the temperature sensor or NTC, this can be cause by a short as well as an open NTC detection.

  • Check wiring to temperature sensor
  • Check temperature sensor
  • Check wiring control module

 

E3

Water heating time out or fault

The dishwasher has failed to heat with water in a reasonable time or has failed to detect the water heating element.

  • Check water heating element wiring
  • Check water heating element
  • Check wiring to main control module

 

E4

Dishwasher has failed to drain

The dishwasher has failed to drain the water from the sump.

  • Check for any obstruction or blockage in the pump
  • Check the drain pump
  • Check wiring to the drain pump

 

E5

Flow meter not responding or reading correctly

The dishwasher has failed to sense the flow meter correctly and probably not fill.

  • Check flow meter
  • Check regeneration chamber for blockage

 

  More Hoover Dishwasher Help, Advice And Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Hoover dishwasher a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you. But if you are in any doubt at all or don't think you are up to diagnosing the fault yourself please get a professional repair engineer.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other dishwashers:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

Be aware that these Hoover dishwasher fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them. 

Also note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Hoover dishwasher model please post a request to confirm this in the forums.

Paul
Hoover dishwasher error
My Hoover dishwasher gives EC error. What is the solution
Rania
My Hoover dishwasher gives EC error. What is the solution
My Hoover dishwasher gives EC error. What is the solution
Emran Hasan Abu Hamdeh
E4
how to resolve reeor E4
Kate Harper
water not draining away
dishwasher has just been installed to different location and will not drain after washing
Machine is only a few weeks old and worked OK where first installed

Kenneth
Could be anything really, you would have to investigate but do make sure that the spigot end is cut off if it has been installed to new plumbing.
Leah
Dishwasher fault E3
Not even 1 month old machine keeps beeping error code3 doesnt heat and dishes not washing
Wilma
My dushwasher after filling with water when starting cocky keeps bleeping and continues through full cycle but at end dishes are not clean
Andrew Wight
My hoover dishwasher has power but wont start any programs??
steven chesney
wat about dishwashers that have no display on them? mine only has 4 led lights for wash rinse etc. a manual for the dishwasher would be handy...
julie hirstle
my dishwasher starts then stops shortly after

1000 Characters left