Washing Machine Spare Parts

Buy washing machine spare parts in our store at discount prices and get fast support from our team of washing machine part experts with a vast knowledge of the domestic appliance industry

Email us for washing machine parts you need and we'll do the work for you

shop spare parts

User Rating: 1 / 5

Star ActiveStar InactiveStar InactiveStar InactiveStar Inactive
 

Asko Fault Codes

Asko logo

These fault codes apply to later Asko WM25 "Circle Series" washing machine produced in Sweden by Asko, the fault codes for the earlier versions may be similar.

The fault codes below will apply to washing machines from Asko, ISE and Maytag sold in the UK and they will look like the ISE 1606W and 1406W both models employ these fault codes.

Before you start any investigation of the fault or even remove the lid of your Asko washing machine please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying spares from our spare part store and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer from the link below.

  Asko WM25 Series Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Asko and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our washing machine fault finding guide from this link before you begin.

Please check that any Asko washing machine spares recommended are suitable for use on your particular model and serial code. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

F1

One LED segment lit around Start button: Door closure fault

  • Washing machine door open, close door

All LED segments lit around Start button: Overfill error

  • Washing machine overfilled - too much water detected
  • Check for overfoaming holding pressure sensor open*
  • Check pressure sensor

 

F3

Washing machine has not drained - failure to detect drained correctly

  • Check for overfoaming holding the pressure sensor open - ghost fault*
  • Check drain pump for obstruction or blockages*
  • Check outlet hose for blockage (small coins etc.) and any kinks*
  • If the pump only runs for approx 20 seconds check level system for fault
  • Check wiring etc. to pump
  • Check drain pump

 

F4

Washing macine does not detect any water intake - not filling with water

  • Check that the filter in the machine’s water intake is not blocked
  • Check the inlet valve. If necessary, replace the water valve
  • Check voltage to the inlet valve. If there is no voltage, this could be due to a fault in the level system, wiring or control unit

 

F6

Door opening fault

  • Check for faults on the door lock or wiring to the door lock.
  • Check the function of the level sensor.
  • Check the control unit.

The faults marked with an asterix are the top causes of the particular error code being displayed.

These models are very reliable machines and tend not to fail, the biggest single cause of any issues is use or misuse, incorrect detergent, overloading, things blocking the pump and so on. Please check thoroughly before calling an engineer.

  More Asko Washing Machine Help

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Asko washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

You also have to understand that the fault or error codes shown are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them. 

Please also note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Asko washing machine model please post a request to confirm this in the forums.

1000 Characters left