Washing Machine Spare Parts

Buy washing machine spare parts in our store at discount prices and get fast support from our team of washing machine part experts with a vast knowledge of the domestic appliance industry

Email us for washing machine parts you need and we'll do the work for you

shop spare parts

User Rating: 4 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Inactive
 

Brandt Fault Codes

Brandt made washing machine error codes and spare parts

These fault codes were used on German made Brandt washing machines while the company was owned by the French company Brandt. When Brandt was broken up the Brandt brand name was transferred to becoem Elco Brandt then subsequently bough by Fagor, these fault codes will not apply to later Fagor built washing machines with a Brandt badge on them.

These error codes will also apply to some Blomberg badged washing machines as well prior to Blomberg being bought by Beko.

Before you start any investigation of the fault or even remove the lid of the washing machine or washer dryer please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying Brandt washing machine spares from our spare part store and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer to repair a Brandt washing machine using the engineer search.

  Brandt Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Brandt and UK Whitegoods and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our basic washing machine fault finding guide from this link before you begin.

01

Water inlet fault detected - washing machine will not fill
  • Check water supply to the washing machine is on
  • Check fill hose is not kinked
  • Check inlet valve filter
  • Check water inlet valve

 

02

Drain error detected - washing machine will not drain
  • Check drain pump filter
  • Check drain pump for blockage or restriction
  • Check outlet hose for blockage or obstruction
  • Check drain pump operation
  • Check drain pump wiring

 

 

03

Heating error detected - washing machine will not heat water
  • Check wiring to wash heater and thermostats
  • Check wash heater
  • Check thermostats

 

04

Motor triac shorted
  • Check motor connector block
  • Check wiring
  • Check electronic control 

 

05

Temperature NTC error detected
  • Check temperature sensor wiring
  • Check temperature sensor

 

06

Motor tacho fault
  • Check motor connector block
  • Check wiring
  • Check motor carbon brushes
  • Check tacho connections
  • Check motor

 

07

Door latching or lock error
  • Door not detected closed
  • Check door is closed
  • Check door catch and latch
  • Check door lock wiring
  • Check door lock

 

09

Program selector fault
  • Check program selector connector
  • Check wiring
  • Check electronic control

 

10

Overfill detected - washing machine fills with too much water
  • Check level sensor connector block
  • Check wiring
  • Check electronic controller

 

11

Water heating fault detected - washing machine does not heat water
  • Check wiring to wash heater and thermostats
  • Check wash heater
  • Check thermostats

 

12

Door latch fault detected
  • Check door is closed
  • Check door lock connector block
  • Check wiring

 

13

Spin speed error detected
  • Check washing machine drive belt
  • Check motor connector block
  • Check wiring
  • Check motor carbon brushes
  • Check tacho connections
  • Check motor

 

18

Incorrect mains frequency or voltage
  • Check mains electricity supply

  More Brandt Washing Machine Help

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Brandt washing machine or washer dryer a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our washing machine forum after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

You also have to be aware that fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them.

Please also note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Brandt washing machine model please post a request to confirm this in the forums.

jeremy rind
brandt Dishwasher error E45 ?
We have an error E45 and the washer will not start the wash cycle?

Dimitris Rizos
Washer ,F04 code error ,what does it mean
I have a washer brandt 8kg wfk1248E and in display appears F04 error code and the machine doesn't start to work. What F04 does it mean
ΣΩΖΩΝ ΚΩΝΣΤΑΝΤΟΥΛΑΚΗΣ
wtd1276k
THE WASER IS NOT DRYING AND PRESENTS ERROR D23
arthur dimas
001 code
we have a Brandt WTE 1272K model. my mother it seems pushed the wrong button and now after pushing the On button it comes the code 001. Regularly should be 000. How can we change it ? Many thanks!
Jan Harbour
I have just received a nasty electric shock off my 3 year old washing machine. The casing has frequently developed rust and paint loss Not at all impressed
R Moore
Brandt BWF394TN. 132866283Fault: 0 (on the left hand side of display)Machine >2yrs oldUsed during holidays only.No problem with last 3 cycles.Fault above appeared at end of last cycle regardless of setting.All known obvious problems eliminated systematically.All lights on display working properly during last cycle Suggestions please
POPOTI DORA
WHAT FAULT CODE d17 REFER TO?

1000 Characters left