Washing Machine Spare Parts

Buy washing machine spare parts in our store at discount prices and get fast support from our team of washing machine part experts with a vast knowledge of the domestic appliance industry

   Use this link to email us and ask us about washing machine parts you need and we'll do all the work for you

shop spare parts

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
 

Baumatic Fault Codes

Baumatic logo

This set of fault codes for the Baumatic Mega10 range of washing machines with a digital display, not to be confused with the Megadigital range made by Gorenje as this range is made in Korea by Daewoo . Theses fault codes will not relate to other Baumatic washing machine models as they will often have been produced by different manufacturers, please check carefully before using these fault codes.

These washing machines are made for Baumatic by Daewoo so the error codes below may well be replicated on certain models from Daewoo and others.

Before you start any investigation of the fault or even remove the lid of your Baumatic washing machine please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying Baumatic washing machine spares from our spare part store and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer using the engineer search facilty.

  Baumatic Mega10 Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Baumatic and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our washing machine fault finding guide from this link before you begin diagnosing the problem with your washing machine.

Some of the translations to English of these fault codes was, politely put, questionable and have had to be reconstructed as best possible.

Baumatic Washing Machine Spare Parts

We have purposely not listed any Baumatic washing machine spares in this article.

Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

IE

Water inlet error - washing machine failed to fill

The fault code is displayed, if the washing machine does not detect any incoming water.

OE

Water has failed to drain from the washing machine

This faut code is displayed should the washing machine or washer dryer fail to drain water from the tank.

  • Check drain pump
  • Check wiring
  • Check water level sensor
  • Check connections to water valve and PCB

UE

Wash load imbalance detected

The wash load has been detected as an unbalanced load and the washing machine or washer dryer has failed to spin.

  • Sort the laundry load and attempt spin again

LE

Washing machine door opening error

The washing machine or washer dryer door has been detected as open or unlocked.

  • Close the door!
  • Check the door lock switch
  • Check the door latch
  • Check PCB

E2

Overfilling error

The washing machine has detected an overfill situation and the failure code is displayed.

  • Check water inlet valve
  • Check drain pump
  • Check pressure switch or level sensor

E3

Fan motor error detected

On washer dryer models an error has been detected with the dryer fan motor.

  • Check fan motor for obstruction or blockage
  • Check fan motor continuity
  • Check PCB

E9

Pressure sensor error

The washing machine has detected an error with the pressure switch or level sensor

  • Check wiring to level sensor
  • Check level sensor

E5

High voltage error

We're not quite sure what this one means as the fault code sheet says the following causes this error:

  • Huge noise (don't ask us, we've no clue either??)
  • Spinning with clothing jammed between the drum and gasket
  • PCB failure

E6

EMG Error

Again, your guess is as good as ours on this one as well with the following being listed against the error

  • Huge noise (don't ask us??)
  • Spinning with clothing jammed between the drum and gasket
  • Motor failure
  • PCB failure

E7

Direction error

This error code is displayed should the motor or drum be detected in moving in the opposite direction it should.

  • Check hall sensor

E8

Washing machine motor error detected

A fault has been detected with the main drive motor.

  • Check motor connection block
  • Abnormal loading condition

H1

Dryer temperature sensor error detected

A fault has been detected with the dryer temperature sensor on washer dryer models.

  • Check connections to dryer sensor
  • Check temperature sensor

H2

Wash temperature sensor error detected

A fault has been detected with the washing thermistor or temperature sensor.

  • Check connections to wash temperature sensor
  • Check temperature sensor

H3

Overheating dryer heater element detected

A fault has been detected with the dryer side heating.

  • Check fan motor is clear and unobstructed
  • Check wiring
  • Check dryer heating sensor

H4

Overheating wash heating element detected

A fault has been detected were the washing machine is overheating on wash.

  • Check water level
  • Check temperature sensor

H6

Wash heating element failure detected

A fault has been detected were the element is not heating.

  • Check wash heating element
  • Check wiring
  • Check thermistor

H7

Dryer heating element failure detected

A fault has been detected with the drying heater element.

  • Check wiring
  • Check dryer heater element
  • Check wiring
  • Check thermistor

H8

Washing heater overheating detected - no water in washing machine

The wash heating element has been detected as working with no water in the washing machine.

  • Check water level
  • Check wiring
  • Check thermistor
  • Check PCB

PEF

Washing machine filter detected as blocked

The machine has detected the drain filter as being blocked

  • Check the drain filter and clear any blockage

  More Baumatic Washing Machine Help

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Baumatic washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

Please understand that fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what washing machine fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them. 

Also note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Baumatic washing machine model please post a request to confirm this in the washing machine forum.

1000 Characters left