Washing Machine Spare Parts

Buy washing machine spare parts in our store at discount prices and get fast support from our team of washing machine part experts with a vast knowledge of the domestic appliance industry

   Use this link to email us and ask us about washing machine parts you need and we'll do all the work for you

shop spare parts

User Rating: 3 / 5

Star ActiveStar ActiveStar ActiveStar InactiveStar Inactive
 

Amica AWCT Fault Codes

Amica spare parts

Fault codes for the Amica AWCT range of washing machines that display a fault using a series of lights or LEDs to indicate the fault that has been detected on the washing machine.

The error code is displayed as the relevant lights being lit on the washing machine control panel although the position or function of each LED may differ from model to model.

A sample of the order is shown in the image to the right.

Before you start any investigation of the fault or even remove the lid of your Amica washing machine please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Amica washing machine fault code lights

Please remember to support our site by buying Amica washing machine spares from our store and, if you decide that you need an engineer please support the local repairers that help make this site possible, you can search for a repairer using the engineer search facility.

  Amica Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Amica and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our washing machine fault guide from this link before you begin.

Please check that any Amica washing machine spares recommended are suitable for use on your particular model and serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine or washer dryer. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

  Fault Code Lights Legend

This is our very simple legend to show the state of the lights, lamps or LED's as they are unlit, flashing or lit continuously.

Fault code or error code light off Light or LED not lit Fault code or error code light flashing Light or LED flashing Fault code or error code light on or lit Light or LED lit solid, no flash

  Amica Washing Machine Fault Codes For AWCT Range

Fault code or error code light on or lit

Fault code or error code light on or lit

Fault code or error code light on or lit

Fault code or error code light on or lit

No door lock signal detected / No door lock triac signal / Door not unlocked in two minutes

This fault code can correspond to any of the three faults listed above.

  • Check the door is closed
  • Check the door latch
  • Check the door lock
  • Check the door lock wiring
  • Check the electronic controller

 

Fault code or error code light off

Fault code or error code light on or lit

Fault code or error code light on or lit

Fault code or error code light off

Fill time has exceeded two minutes / No signal from pressure switch after ten minutes

This fault code can correspond to either of the two faults listed above.

  • Check water supply is on
  • Check inlet valve is not block
  • Check inlet hose is not kinked
  • Check drain hose installation is high enough etc.
  • Check water valve
  • Check wiring to pressure switch
  • Check pressure sensor

 

Fault code or error code light on or lit

Fault code or error code light off

Fault code or error code light on or lit

Fault code or error code light off

Water not drained from washing machine in allotted time

The level sensor has not detected that the washing machine has been drained inside one and a half minutes or, the machine has not been detected as empty after ten minutes from start of drain.

  • Check the washing machine filter for any blockage or obstructions
  • Check the drain pump for any blockage or obstruction
  • Check the outlet drain hose for any blockage or obstruction
  • Check wiring to water pump
  • Check water pump for failure
  • Check level switch
  • Check electronic controller

 

Fault code or error code light on or lit

Fault code or error code light off

Fault code or error code light on or lit

Fault code or error code light on or lit

Overflow - overfilling with water

Water level has exceeded the overfill level on the pressure switch or sensor

  • Check water valve
  • Check level switch or sensor
  • Check electronic controller

 

Fault code or error code light off

Fault code or error code light on or lit

Fault code or error code light on or lit

Fault code or error code light on or lit

Heater or NTC error detected

  • Check heating element
  • Check wiring to NTC sensor
  • Check NTC temperature sensor

 

Fault code or error code light on or lit

Fault code or error code light on or lit

Fault code or error code light on or lit

Fault code or error code light off

Washing machine motor does not work

  • Check motor wiring
  • Check motor
  • Check electronic controller

 

Fault code or error code light off

Fault code or error code light off

Fault code or error code light on or lit

Fault code or error code light off

Input voltage incorrect

The power supply voltage is outside of 160-235 Volts, 50/60Hz

  • Check power supply

 

  More Amica Washing Machine Help

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Amica washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.
Fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them. 

Also note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Amica washing machine model please post a request to confirm this in the forums.

Gravatar
Ms Stanway
Washing Machine
I have a new Amica washing Machine, It worked the 1st time ok., Now when I press start or even just plug it in the END sign lights up, and then nothing happens, it just won\'t start.
Gravatar
Rob Atkins
Model number AWCT10L. I am have trouble in that when the machine finishes washing cycle and goes to rinse it stops working. As you look at the machine its the 2nd light from the right lights up red all the others go green. Can you please advise.....

1000 Characters left